tial Q on a non sd car ?

[donniegst]

hey guys i just bought a tial Q 50mm bov. im wondering if i can run the bov without sd? i have the parts to put sd on my car but i want the car up and running on the stock 2g maf when i take it to stm for them to install the speed density then tune it. so pretty easy question can i run the bov without sd?

 

[Paintballaa5]

Just wait till you have the SD setup installed. You'll be venting out metered air, in turn making you run rich. Yea people do it, but it's wrong.

 

[donniegst]

guess im sticking to the leaking freddy to get me to stm

 

[boostdawd]

U can drive the car to your tuner to get speed density set up with the tial q bov. Just babysit it and don't go ham. Sure it's not recommended but it will be only for a few hours or miles. Don't over think it

 

[DSM IN MN]

Merry Christmas.

https://www.extremepsi.com/store/product.php?productid=24254&cat=0&page=3

 

[boostdawd]

Merry Christmas.

https://www.extremepsi.com/store/product.php?productid=24254&cat=0&page=3

He's going to get it tuned for speed density and can vent atmospherically afterwards. Good option but those 70 bucks may get better use.

 

[donniegst]

yea thats what im thinking $70 would be better spent towards a tank to rail kit .............. i think im just gonna get it going as close to running and driving so i can make the 30 min drive to stm swap out the bov at stm and just have it tuned for the speed density
but thanks for the idea of the recirc if i was just gonna keep the car on the 2g maf i would spend the 80 buy the time u buy a new oring

 

[donniegst]

i broke down and went to stm today

You must be logged in to view this image or video.

[/URL]

also found out stm dosent tune with speed density so gonna have to stay on 2g maf till i find someone close who knows sd

 

[boostdawd]

They don't tune speed densiy? What?! That's crazy. With enough reading and practice u can begin to tune your own car. It's not to difficult and there is a lot of great members here to help u out with the learning curve along the way.

 

[donniegst]

yea im going to start the whole tuning thing this weekend gonna get the basics down with the 2g maf and what not getting going good enough so i can drive it around. then i have a set of bc 272 and arp head studs for it so ill add them in and figure out tuning for them. baby steps

 

[donniegst]

ok so i got the bottom recirc part on and if i look into where the hose is suppose to connect i can see that the bov sits open is this normal