stock o2 housing

[kali_GSX]

Are the two studs that connect the o2 housing to the downpipe easy and can be taken out or are they weld on..

 

[97 4G63]

They can be taken out there not welded on

 

[kmoore]

They can be taken out there not welded on

That is correct.

 

[kali_GSX]

so can it be screwed it out or have to be drilled

 

[92dsmtalon]

I believe it is a big bolt with a nut on the other side. Sometimes they can be a bi*** to get out, but just use some PB Blaster and it should ease the process a bit.

 

[turbosax2]

so can it be screwed it out or have to be drilled

You can unscrew them using the double nut method.

 

[kali_GSX]

can it be done still bolted to the turbo

 

[92dsmtalon]

can it be done still bolted to the turbo

Yes.

 

[laserspeeddemon]

It won't be fun though.


And thier called studs, NOT bolts.

 

[talonalex92]

I had no problems doing it on car, with turbo. Just jack the front end up, get a 1/2'' drive ratched or impact gun, the appropriate socket and an extension and itll come off. If not, PB blast and repeat.

 

[92dsmtalon]

It won't be fun though.


And thier called studs, NOT bolts.

Yea, I know, I was just having a major brain fart and couldnt think of the word, and the first one that came to mind was bolt, haha.