Still not starting

[1995 brian]

I need help with a no start. I have a 1995 gst and its not getting spark in cylinders 2 and 3. Tested the coil (tested within spec) and swapped the transistor with a working one and still nothing. It cranks then it pauses like it had a low battery but the baterry is fully charged. Also checked the injectors if they were firing and there good. New wires new plugs. Running out of components to test. Any ideas. Really need to get this car started.

:eagle:

 

[TNTDSM7777]

Try the crank position sensor and cam angle sensor. I had no spark and it turned out to be my crankposition sensor. Also, you can check if the caps in the ecu are leaking

 

[1995 brian]

How would i test those two.

 

[TNTDSM7777]

Here is everything you need http://www.dsmtuners.com/forums/new...art-no-fuel-prime-no-spark.html#post151265626

 

[G-STowner]

I have a G-st and just had this problem. I was not getting spark to cylinders 1 and 4. first I replaced my ignition coil. didn't work. so to check if it was my CAS this is what I did. turn the car over, while turning it over your rpms should be around 200. if they just sit at 0 until the car actually starts it is probably your CAS. so then unplug your CAS. If your car starts and runs the same as it did with the CAS plugged in then it is your CAS I'm guessing. I also pulled out my crank sensor and I got no spark at all. So... I replaced my CAS and it worked!