Shitty Compression Test Results

[Jimmer307]

My first problem is that my compression test results were aweful (1-4 115, 130, 140, 150) and I am wondering what the problem is?

BTW: If you have not checked my mods, i have Eagle Rods & Wiseco Pistons if that effects the results any.

 

[xdxoxuxgx]

Those aren't terrible numbers, but it looks like cylinder 1 is a little low.

 

[Jimmer307]

so any suggestions on what i can do to get my #1,#2,&#3 cylinders up?

 

[92_awdtsi]

I had the same issue but #1 was 112 then 234 were all 120's. not sure why ### the motor still runs strong.

 

[marcmsj]

Tried doing a wet compression test? That will tell you if your rings are bad or not. If the results are the same, then I'd do a leakdown test.

 

[viprez586]

Cylinder leak down test. It'll tell you where your loosing compression.