AEM Selecting FIC injectors with AEM EMS

[CoopsCoupe]

I have custom (its engraved on the side of them) made fuel injectors from FIC they are 1200 cc's and they are 2.2ohms. I need to know how to select them in the primary fuel injector wizard with AEM EMS. They don't give me any other injector that is operated on 2.2ohms.

 

[CoopsCoupe]

I believe I recieved my answer. I was told to just select FIC 1000's @ 2ohms...

 

[fp-green-95tsi]

Yes, you would use FIC 950's in the wizard.

 

[CoopsCoupe]

Well, I was told by a tuner to choose the 3ohms so that the AEM EMS isn't over worked... Im still getting to feedings of info. Any one help me?

 

[b00stedAWD]

I would use RC 1200cc with 3ohms.

 

[turboglenn]

This is one of the things i don't like about the AEM, it's got a ton of options and half f them seem like they are only there to make setup and tuning harder. Most of the older EMS's I've used don't care what injector is used as long as you don't drop total impedance per driver below 1.5 - 2 ohms

Maybe there's something to be gained by being able to select these things individually, but really i think it's making it harder for the "new guy" to get into and understand engine management.

sorry to rant in your thread, i just get disappointed to have to see people waiting to drive their car because of all the little stuff the AEM needs to have done.. From resistor packs to pinout changes, especially in the plug-n-play models.