Say Something About The Person Above You

[EDM95]

Maybe has an idea that don't include fire?

 

[2GbTalonGuy]

Should know I also noticed Brian creeping on us.

 

[2GbTalonGuy]

Maybe has an idea that don't include fire?

Should get a breaker bar.

 

[EDM95]

Should know I went for an oil change in my mazda last year and my breaker bar came up stolen.

 

[daplatano91]

Should use a piece of skinny pipe to put over the handle of your ratchet. Widow my gsx has a Evo 8 ecu. Tephra mod v7 has valet mode. Bud I have the pigtail I needed to know which wires are for 12v ground and switch.... I'm guessing the green white stripe can be used to switch something on with red as 12v ign and black ground.

 

[2GbTalonGuy]

Knows EDM should buy a new breaker bar, because they are quite useful.

 

[daplatano91]

Is correct about the breaker bar but should give some info on my wire logic

 

[2GbTalonGuy]

Should know I don't know much about 1G wiring.

 

[Bud92gsx]

Bud I have the pigtail I needed to know which wires are for 12v ground and switch.... I'm guessing the green white stripe can be used to switch something on with red as 12v ign and black ground.

Dude for real, I tore my dash apart, and you needed something else..That's a downer..Red is power, black is ground, anyone know has ever wired anything could figure that out..SO what do you need me to find out about the green, and green and white?

EDM95..You can pull the black handle off your jack and use that as a breaker bar..

 

[2GbTalonGuy]

Is very helpful today.

First on page 1030.

 

[Dhan]

Was waiting for Brian to take the plunge and make a funny ^^

 

[2GbTalonGuy]

Noticed brian is no longer creeping on us in this thread.

 

[Bud92gsx]

Knows Brian just like to be a creeper.Nah he was probly just making sure we weren't going all crazy, Being this thread is kind of not moderated..But sumtimes it is nice to se a mod in here hanging out..

 

[daplatano91]

Should know that almost every switch has a constant ground and 12v but also has a wire that is charged when the switch is activated. Thats why I'm trying to figure out which one of the green wires it is. I guess I'll go out and guess and check with the test light tomorrow.

 

[Bud92gsx]

Are you wiring it straight to the fuse box..Because I thought all the wires were already ran, and all you needed to do was plug into the pigtail or switch itself..So what info do you need me to figure out about the green wire and the green and white? I can trace them but IDK how far, I think they go into a loom right behind where you unscrew the panel from..

 

[daplatano91]

I'm using the fog light button to control my 2nd fuel pump. I don't want it running all the time so I'm trying to figure out how to wire the fog light switch.

 

[2GbTalonGuy]

Is balls deep in the wiring of his car.

 

[Bud92gsx]

Couldn't you just run power ground, accesory(pump)..And then when you push the button the 2nd pump would come on..Or do you need to use all 4 wires?

 

[daplatano91]

Should know he is correct but I need to know which wire on the switch is accessory.

 

[Bud92gsx]

Knows he's got himself in a quandary there..I guess you will ya just have to stick t pin in when the switch is on and figure that one out..I don't have my haynes manual, its in storage.Or I would try to check n see if it was in there..

 

[daplatano91]

Is correct and I will find out tomorrow and will post for the world to know I doubt the haynes manual goes in that deep of detail.

 

[Bud92gsx]

Knows the haynes manual is shit..But sumtimes if your lucky it has what our looking for..

 

[Alan11]

should know the manual helped me remove my Differential, along with the whole rear frame.

 

[Dhan]

Hasn't been enlightened by the "real" Chrysler shop manual yet.

 

[Bud92gsx]

Knows thers a chrysler manual too..