S-AFC 2 Tuning

[s4b0t4g3r]

I've looked on other sites, searched threads etc. I am looking for some settings for my SAFC2. All i have done to the car is removed aircan, K & N Filter, Removed Silencer, and lower honeycomb removed, NGK Plugs. After I removed the the honeycomb, my car keeps dying when I let off throttle. How should I go upon finding the right settings?

So basically I am running, stock boost, 14B, 450cc.

1990 Talon TSi AWD Turbo.

 

[m1nd64m3]

The only way to safely tune with an afc is to use either a datalogger or wideband. Get a datalogger, you should be able to pick up a cable and disk brand new for a little over 100$from digitaltuning.com. Then get an old palm and go tune.

 

[titogs95]

Do you have any datalogger? You will need that at least. I will recomend you to get a Wideband to tune the car at WOT.

for now you can read this:
http://www.dsmtuners.com/forums/showthread.php?t=58403

But you still need a datalogger.

 

[MyBeatGSX]

As a last resort to get you to work or whatever, find a similar car on here. It worked to get me to the dyno. Do are tune as soon as possible.

http://www.roadraceengineering.com/newafcsetting.htm

There was NO reason to remove the honeycomb on your car.

 

[s4b0t4g3r]

Thank for your help guys.
I've got it working 100% now. I just adjusted the correction % at idle and (richened it up)
It idles better than ever and it doesnt die anymore!

 

[m1nd64m3]

Nice, but I would still invest in a pocketlogger.

 

[GSTBlack95]

Or go to a dyno and get a self tune done. they should have a wideband and such there as well, if you dont have a plam or anything.