RRE 1g CAS HARNESS

[matrixgst]

I just wanted to give everyone a heads up on this harness, I recently swap a 6bolt with 2g head in my 95 gst. I tell you for the longest time I wasn't getting spark. I was getting fuel though. Anyway to make a long story short I bought a power transistor, coils,ecu, and a new 1G CAS. Still after all of this no spark. until I put a test light on RRE 1g Harness and I noticed something I was getting power in my ground wire not the power wire. That completley through me off. I noticed that the wires on the harness for the crank sensor were completely placed wrong. So I had to cut them up and rewire them. Sure nuff my car started right up. I just wanted to give you guys a heads up for any of you that might be having trouble with the car not sparking up and of course with this wiring harness. Make sure the colors line up identical to each other on the harness. You can look at the images that RRE has on their website for wiring your own. Thats how I noticed.

 

[project_tsi]

This is b/c you have a 95 which fires differently than any other year dsm.