dacowgod
Supporting Vendor
- 462
- 289
- Feb 3, 2006
-
Morgantown,
West Virginia
Here’s this week’s mix of DSM parts at Rix Racing:
Numbers match the photos.
1. Masfab Twin Scroll T4 SideWinder Twin Scroll T4 exhaust manifold, Precision 46mm Wastegates and Bullseye S372 Turbocharger. — $2,000
Used good working order.
Photos, details & availability
2. Baer calipers with 2G adapter brackets and 13 inch rotors — $500
Used
Photos, details & availability
3. DVDTFAB sheet metal intake manifold, dual rails and Q45 TB for DSM — $850
Includes vacuum block. We can powder coat for extra!
Photos, details & availability
4. AEM X-Series Wideband Air/Fuel Ratio Gauge with Sensor & Wiring — $175
Used AEM X-Series wideband air/fuel ratio gauge with black face and black bezel.
Includes the gauge, oxygen sensor, and wiring harnesses shown. Features a digital center display and front-mounted control buttons.
Wiring has taped sections and crimped connections. Sensor shows surface discoloration from use.
Photos, details & availability
5. Injen intake pipe recirculating 2g 95-99 — $195
Used has scratches see pics
Photos, details & availability
6. DERALE 13960 - 25 ROW HYPER-COOL REMOTE TRANS COOLER -8an fittings — $400
Come with what you see. This is new never used just been sitting around.
Photos, details & availability
7. Greddy profec B spec 2 Electronic boost controller. — $250
Used. See pics has some scratches
Photos, details & availability
8. 6 bolt ARP L19 head studs 4G63 DSM — $300
These are used one time L19 head studs.
Photos, details & availability
9. Tial sport V44mm wastegate — $250
Used
Photos, details & availability
10. Zeitronix wideband air/fuel meter Zt-2 +ZR-1 gauge — $375
Photos, details & availability
11. Rear DCsport strut bar 2g eclipse 95-99 DSM — $200
Used as seen
Photos, details & availability
12. STM ABS delete kit 1g DSM — $300
Used
Photos, details & availability
13. 2g 95-99 Eclipse center garnish — $100
Used no cracks all tabs are intact does have some scratches
Photos, details & availability
14. Dejon intake pipe coated black (recirculating) DSM — $125
3 inch Used freshly coated black.
Photos, details & availability
15. Innovate LC-1 wideband — $120
Used
Photos, details & availability
16. Aeromotive AFPR — $100
Powder coated purple
Photos, details & availability
17. AEM Digital Wideband Air/Fuel Ratio Gauge with Sensor & Wiring — $130
AEM digital wideband air/fuel ratio gauge with black face and black bezel.
Includes the oxygen sensor and wiring harness shown.
Photos, details & availability
18. Fuelab "Prodigy" Fuel Pump — $400
As titled in very good shape has only seen idle time since being refreshed at FuelLab! This is an In-Line pump with -10 fittings!
Photos, details & availability
19. 7 bolt ARP L19 head studs DSM 4G63 — $225
There are used once L19 head studs
Photos, details & availability
Morgantown, WV. We ship worldwide. Photos, details & current availability: https://rixracing.com/?utm_source=d...aign=inventory_2026-11-05&utm_content=roundup
In-house dyno & automotive machine shop, CNC machining, powder/ceramic coating, engine assembly and DSM builds/repairs. We can help arrange transportation. Shipping and any listed core charges are separate.
Numbers match the photos.
1. Masfab Twin Scroll T4 SideWinder Twin Scroll T4 exhaust manifold, Precision 46mm Wastegates and Bullseye S372 Turbocharger. — $2,000
Used good working order.
Photos, details & availability
2. Baer calipers with 2G adapter brackets and 13 inch rotors — $500
Used
Photos, details & availability
3. DVDTFAB sheet metal intake manifold, dual rails and Q45 TB for DSM — $850
Includes vacuum block. We can powder coat for extra!
Photos, details & availability
4. AEM X-Series Wideband Air/Fuel Ratio Gauge with Sensor & Wiring — $175
Used AEM X-Series wideband air/fuel ratio gauge with black face and black bezel.
Includes the gauge, oxygen sensor, and wiring harnesses shown. Features a digital center display and front-mounted control buttons.
Wiring has taped sections and crimped connections. Sensor shows surface discoloration from use.
Photos, details & availability
5. Injen intake pipe recirculating 2g 95-99 — $195
Used has scratches see pics
Photos, details & availability
6. DERALE 13960 - 25 ROW HYPER-COOL REMOTE TRANS COOLER -8an fittings — $400
Come with what you see. This is new never used just been sitting around.
Photos, details & availability
7. Greddy profec B spec 2 Electronic boost controller. — $250
Used. See pics has some scratches
Photos, details & availability
8. 6 bolt ARP L19 head studs 4G63 DSM — $300
These are used one time L19 head studs.
Photos, details & availability
9. Tial sport V44mm wastegate — $250
Used
Photos, details & availability
10. Zeitronix wideband air/fuel meter Zt-2 +ZR-1 gauge — $375
Photos, details & availability
11. Rear DCsport strut bar 2g eclipse 95-99 DSM — $200
Used as seen
Photos, details & availability
12. STM ABS delete kit 1g DSM — $300
Used
Photos, details & availability
13. 2g 95-99 Eclipse center garnish — $100
Used no cracks all tabs are intact does have some scratches
Photos, details & availability
14. Dejon intake pipe coated black (recirculating) DSM — $125
3 inch Used freshly coated black.
Photos, details & availability
15. Innovate LC-1 wideband — $120
Used
Photos, details & availability
16. Aeromotive AFPR — $100
Powder coated purple
Photos, details & availability
17. AEM Digital Wideband Air/Fuel Ratio Gauge with Sensor & Wiring — $130
AEM digital wideband air/fuel ratio gauge with black face and black bezel.
Includes the oxygen sensor and wiring harness shown.
Photos, details & availability
18. Fuelab "Prodigy" Fuel Pump — $400
As titled in very good shape has only seen idle time since being refreshed at FuelLab! This is an In-Line pump with -10 fittings!
Photos, details & availability
19. 7 bolt ARP L19 head studs DSM 4G63 — $225
There are used once L19 head studs
Photos, details & availability
Morgantown, WV. We ship worldwide. Photos, details & current availability: https://rixracing.com/?utm_source=d...aign=inventory_2026-11-05&utm_content=roundup
In-house dyno & automotive machine shop, CNC machining, powder/ceramic coating, engine assembly and DSM builds/repairs. We can help arrange transportation. Shipping and any listed core charges are separate.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
Attachments
You must be registered for see attachments list