[RESOLVED] is this tob correctly installed

[1g93gst]

hey guys have yet another question i just want to make sure im doing this all right. does this look correct.

<a href="http://s157.photobucket.com/albums/t74/mtchu736/?action=view&current=100_4991.jpg" target="_blank"><img src="http://i157.photobucket.com/albums/t74/mtchu736/100_4991.jpg" border="0" alt="Photobucket"></a>

 

[M5talon]

I can't tell if the return clip is facing up, but if it ain't its wrong.

 

[DSM_PWR]

TOB is correct but it looks like the clip is on wrong

Also do yourself a favor and spray some brake cleaner in that housing

 

[1g93gst]

here the green line is the clip. when i push the fork in and out its a little loose on the fulcrom ball or w/e its called. is this normal?



<a href="http://s157.photobucket.com/albums/t74/mtchu736/?action=view&current=gfd.jpg" target="_blank"><img src="http://i157.photobucket.com/albums/t74/mtchu736/gfd.jpg" border="0" alt="Photobucket"></a>

 

[DSM_PWR]

Its called the Pivot Ball

And yes its normal for it to be a "little" loose, enought for it to pop in/out...

But if its tooo loose, you'll need a new one along with fork

 

[snowborder714]

Its called the Pivot Ball

According to Mitsu, it's know as the Clutch Release Fork Fulcrum But most people know it as a pivot ball.


Here's a reference for how the clip installs.

 

[1g93gst]

thanks guys i believe i did it right and one more thing so i dont have to start a new thread. do you know how many pounds the pressure plates need to be torqued too???

 

[DSM_PWR]

Your still new here so...

PLEASE MAKE SURE TO USE THE SEARCH FEATURE

I torque mine to 14 ft lbs

Make sure to do it in a star pattern