Rate my clutch/pp and flywheel please

[talon2gbuyer]

Hey all, well i finally got the clutch, trans and all that junk off the car (took 2 afternoons, but god damn it, i did it ) Can you guys let me know what you see with regards to my particular situation?


First one is the shot of the Pressure plate that came off the clutch I just took off the car today. Let me know what you think, and anything I should be aware of (as i've never even seen one of these in person until today) like what things mean what in regards to mechanics (like gouging is a result of blank.. ) Thanks brothers!

You must be logged in to view this image or video.

20130505_173918 by talon 2g, on Flickr


Next is the clutch itself.. it felt really mooshy. Kinda odd description I know, but it felt like really soft rubber plus there were gouges all over it (may have been from me prying on the trans)

You must be logged in to view this image or video.

20130505_173914 by talon 2g, on Flickr

and lastly, the flywheel. I'm not genius but those long vertical cracks don't look like they should be there (heat crazing?). Replacement time?

You must be logged in to view this image or video.

20130505_173835 by talon 2g, on Flickr

Thanks again man!

 

[talon2gbuyer]

Got some pictures of the PP with a flat edge on it. It has no contact with the plate with the exception of the very far edge (which makes sense since our clutches wear from the inside edge out), which makes me think this clutch and PP are completely toast. Is my assumption correct?

You must be logged in to view this image or video.

20130505_192539 (1) by talon 2g, on Flickr

You must be logged in to view this image or video.

20130505_192533 by talon 2g, on Flickr