Putting back together hx35w problems

[onefast2gdsm]

I just put back together my holset and the oil feed an return ports are not where theyre supposed to be. The cold side lines up to where it should be with the hotside. It seems the oil ports are kind if sideways. I dont know how this is possible if the cold side only goes on one way?

Heres some pics.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

 

[JusMX141]

Remove the locating pin and you'll be able to install the housing into the cover however you want it to be. How you have it there is how it would be clocked from the factory for a 97-02 Dodge truck.

 

[jjrock5]

Did you clock it wrong?

 

[onefast2gdsm]

Justin, would it be ok if i left it that way or no?

 

[JusMX141]

Not if you want it to drain properly.

 

[onefast2gdsm]

Thank you for the advice. Took it back apart and put it the way it should be. Thanks again!