Problems Logging Palm

[biker_joe89]

I have a Palm 3c with the MMCd logging software. I know for a fact it is properly wired. It just wont show anything though. I think it could be in the settings. Here are what i have my settings on. Alarms Rpm with a threshold of 2000 log trigger on(tryed it with it off still nothing). under preferences this is what i have the settings on COM 1920 bps Units english EGRT 3.0 BAR Vehicle DSM ECU Clock 100% Base Time 10* Alarms Checkmark O2 NonLin checkmark AutoLog Checkmark

Every time I uncheck pause to try to start logging it just puts a check on pause after about 3 seconds. I did manage to make something happen when I changed the COM setting to SIMULATE. But someone please help me with this I have given up.

I guess the data wire wasn't getting a good connection I have got it to work a little bit now it keeps doing this but every time I mess with the data wire it works again.

 

[dabishop1983]

Glad to see you got this resolved. I had trouble using that style of logger cable as well. I ended up getting a logger cable off of ebay which just plugs right into the OBD1 port. Never had any issues after that. It's $30 but it's plug and play. If you search around, you may be able to find one used or cheaper somewhere else. Here's the link.

DSM 1G Mitsubishi Datalogger Cable Eclipse Talon 3000GT:eBay Motors (item 120511610971 end time Jan-05-10 05:24:56 PST)

 

[biker_joe89]

Thanks for the tip I still get the problem sometimes but i know its the connection so i will be getting on of them thanks.