The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

problem removing balljoint nut

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

yangtech

15+ Year Contributor
268
2
Sep 19, 2004
Manitowoc, Wisconsin
got the driver's side half-shaft out and i'm working on my passanger's side but the stud on the balljoint is turning with the nut... i was thinking about cutting the boot on the balljoint and just and clamp the stud and try to get the nut. any other suggestions would really help me. my garage is a mess..
 
Take a deep well socket about the same size as the lower portion of the ball joint and put it on a jack, put jack under a-arm and ball joint. Lift jack until ball joint stops spinning within itself.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

  • For sale 4G63 Aeromotive 13113 Fuel Pressure Regulator
    Aeromotive 13113 Fuel Pressure Regulator $275 + shipping & paypal fees* these are $395 online...
    • jersygsx
    • Updated:
    • Expires
  • Wanted 1g Harness
    Wtb 1gb fuse box harness
    • 92AWDHX40
    • Updated:
    • Expires
  • For sale 2g 2G Water Pipe
    2G Water Pipe $50 + shipping & paypal feesYou must be registered to see element.You must be...
    • jersygsx
    • Updated:
    • Expires
  • For sale 1g 1G Turbo Water Pipe
    1G Turbo Water Pipe $50 + shipping & paypal feesYou must be registered to see element.You must...
    • jersygsx
    • Updated:
    • Expires
  • For sale 2g Clean title
    1995 GSX clean title heavily modified. Tuned on e85 houston,tx
    • FirstTimeDSM
    • Updated:
    • Expires
Back
Top