1. Join the Community!

    DSMtuners is a massive archive of DSM information - but more importantly, it's a COMMUNITY! Join in and participate with other DSMers, and invite all of your DSM friends to make this place their home. Chat with others, create a build thread, post questions and answers. Get involved! Logging in will also remove many of the advertisements, along with this notice. ;)

1G PLM Backdoor FMIC

Posted by craracer05, Jan 26, 2021

Tags:
Please Support ExtremePSI
Please Support ExtremePSI
  1. craracer05

    craracer05 Supporting Member

    243
    4
    Joined Sep 29, 2005
    Warren, Ohio

    Drag Race Build 1K  1

    1994 Eagle Talon TSi AWD
    350 whp · 300 lb/ft · 1G DSM
    Loading...
  2. Vegas Smith

    Vegas Smith Proven Member

    4,204
    2,049
    Joined Dec 2, 2002
    Houston, Texas
    They'd better be really close to the ETS because you don't have a lot wiggle room with the backdoor entrances. I wouldn't want the 3" piping.
     

    Street Build 5K  4

    1993 Eagle Talon TSi AWD
    awd · manual · 1G DSM
    Loading...
  3. craracer05

    craracer05 Supporting Member

    243
    4
    Joined Sep 29, 2005
    Warren, Ohio
    It looks like it is a 1/2" narrower on the width, the 3" pipe on the cold "intake" side should be ok but it will probably be tight on the hot "turbo" side. Was thinking a 3" to 2-1/2" reducing 90 coupler at the turbo.
     

    Drag Race Build 1K  1

    1994 Eagle Talon TSi AWD
    350 whp · 300 lb/ft · 1G DSM
    Loading...

Share This Page

Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Feal Suspension Fuel Injector Clinic Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com OHM Racing Raven Fabrication RixRacing RockAuto RTM Racing SouthBay Fuel Injectors STM Tuned VR Speed Factory