Oil feed from head

[AWD laserbeam]

Does anybody know the demensions of the bolt, where you tap in for your oil feed from the head. My banjo fitting to tap for the oil is a little to fat, so it will not fit on with the crush washers, thus im leaking oil. I need to get a longer bolt to fit into my head so i can use my crush washers.

If anyone knows the size of that bolt i would apprecaite any input.

THanx

 

[oldman]

M10 X 1.25

 

[AWD laserbeam]

Thank you much,
So m10 x 1.5 should be adaquete, or you think that would be too big.

 

[oldman]

I'm not understanding what you're trying to do, sounds like you have the wrong size crush washers.

 

[oldman]

1.25 is the thread pitch not the length, I don't know the length of the banjo bolt.

 

[project_tsi]

Right, the size of the bolt is 10mm while the thread pitch is 1.25. If you want, you can order an OEM replacement bolt here