OFH TO Turbo Feed Line Length?

[spadepro22]

I ordered the ofh to turbo kit from extreme psi and it measures 28" and seem to be fairly short to me to reach from the ofh. Does this length seem right? My car is at the shop so I can't go see if its long enough.

Another thing, will I have to do anything to the oil drain for the 20g?

 

[JusMX141]

You should be able to wrap around the engine bay with a 28" line. Only about 18" max is needed.

 

[Diamond Star Werks]

You should be able to wrap around the engine bay with a 28" line. Only about 18" max is needed.

Lol! Pretty much. I never measured mine but I for a fact its no where near that long. Its actually the perfect length. If I get a chance to measure mine i'll let you know the length.

 

[spadepro22]

Will I be ok leaving the oil drian as is or does something need to be done there?

 

[GIRman67]

I ordered extreme psi's inline oil filter kit and the line they gave me it's about 28" + a combined foot with the rest of the line and filter. The 28" is a good length by itself but the extra foot from the filter is too long for my tastes.

 

[spadepro22]

I'm I ok with the stock drain?

 

[agentorange313]

I'm I ok with the stock drain?

yea, stock 1g td05h turbo drains have a larger ID then most "drain kits". Just clean it all up before the install with some new gaskets and crush washers for the bolts on the oil pan side.

 

[spadepro22]

Thanks guys