2G No spark

[warren]

Lets start with I finished building my 2.3 stroker, and had the wire harness removed. I plug in everything needed to start. The only plug that isn't on is a 4 wire plug near the starter. The rest is two plug for emission.
I've noticed when leaving the key on the isc motor gets really hot.
I'm getting fuel but no spark
I've tried to use coil on plug and still no spark.
So the coil works.
I've replaced the cam angle sensor 4 months befored I spun a
bought a crank sensor from a guy here.

 

[boostdawd]

Can u post a pic of the 4 wire plug?

 

[warren]

In the back of the coil pack ?
Also I just installed the 1g cas but nothing either

 

[warren]

But my crank angle sensor. The red wire is blue and the blue is the one by itself

 

[Dsmkauai]

Is it possible some connectors are swapped? How's the ecu look no leaky caps?

 

[warren]

Well the ecu hasn't been touch in 2 years so I don't think I nest it up.