New Setup Going In, Ohhhh Yeah

[awddynamite]

I got my new setup going in this month, the new setup will include a T4 T04r, the hot side is a small .58ar with a three inch V-BAND flange, the front side is .70ar with 4inch inlet 2.5 inch coming out of the compressor housing, putting a roll cage in it, already have taken out the stock front seats and replacing them with one corbeau bucket seat, the roll cage is gonna be mild steel so the seats out actually wont save any weight.
I might be putting cams in it if money and time allows.
i am getting the car ready for IDRC in palmdale on MARCH 31st, THIS IS SUPPOSED TO BE THE LAST TIME THE TRACK IS EVER OPEN, SO WEST COAST GUYS COME OUT AND REPRESENT THE BEST YOU CAN.

i am looking to get about 550 to 600whp on the same mustang dyno i made 442whp with my old t3t4 60trim setup, if we can get 600 out of her we might be looking for some low low low 10s high 9s out of her, the trannies should last longer seeing how the torque should be a little lower and in a different part of the rpm band BUT not interested in shifting any softer so we will see. i will get vids and pics of the new setup from pomona, its gonna be 420G-A-Y vs HONDA in the class i will probably be the only non-honda in my class. wish me luck and keep your fingers crossed for the first 2gnt in the 9s.

 

[Blitzeclips]

I hope that tranny holds up.

Good luck though. Sounds like alot has been invested into this already...

 

[Slo2gen]

Very intrested in this, get pics and vids.

 

[VelocitàPaola]

I think as you approach that power, other unforseen things will begin to fail... but I'll try to stay supportive.

 

[awddynamite]

ive been racing for along time now and ALWAYS know something is gonna happen and something is gonna break but have been WAY OVER that power level before and know what to expect when i get there!!!

 

[BigRand]

What happend to selling the NT and focusing on the AWD??? Just couldn't part with it yet or what?

 

[bullettdsm]

wish me luck and keep your fingers crossed for the first 2gnt in the 9s.

Good aim! Always set your goals high! Good luck to you man.

MB

 

[RWKustoms]

Good Luck man, you've proved the haters wrong before and I'm looking forward to you doing it again. Much luck with your future mods but just make sure to post pics and vids so we can all drool over them.

 

[cs82685]

What happend to selling the NT and focusing on the AWD??? Just couldn't part with it yet or what?

First thing I thought of.

That would be amazing to see a 420a in the 9's. Good luck

 

[totaleclipse_05]

Wow, I wish you much luck man. That would be a big leap for the 420a to be under 10 seconds. Post up some pics of the progress, I want to see how this thing unfolds.

 

[Locke]

No doubt. Good luck.

 

[BigRand]

awddynamite.....any updates?

 

[awddynamite]

i havent been working on it much, i actually put a new tranny in it and the car was at 16psi on the freeway and the diff exploded AGAIN and shot metal through the hood and everthing else, so for now it will sit since i have 3 collapsed vertibre in my lower back. it kinda makes it hard to work on the car, im planning to move back to WIS in about a year so you will see the car again but a little closer and should be faster if i can figure out the tranny thing without going gaymatic, cause that is just not fun for ME.

 

[BigRand]

well I'm sorry to here about your injuries...good luck with the recovery.

As far as differentials go, Good luck, you might just have to shell out for the quaife