Need pinout for coil pack harness plug.

[karbon]

I need the pinout for both sides of the coil pack harness plug as well as which connects to which. The wires on one side got yanked out of the plug (story below) and I need the pinout of both plugs to be able to match them up again. I'll likely have to buy an aftermarket 3-prong plug and redo the connection.

Here's the story:
I had a MSD DIS-2 awhile ago. One day when I was starting the car, the circuit board inside caught on fire (it was a few years old at this point, not installation error). I disconnected it and used the bypass plug supplied with it, then zip-tied the harness to some other wires. Well apparently yesterday the zip-tie broke or something, and the harness took an exciting journey around my axle, which pulled the wires out of the top plug and the butt splices on the other side.

 

[karbon]

Ran down and took note of the wire colors...

Top part of plug:
black/white
blue/red
blue/black

Bottom part:
blue
red
blue/black

I just need to know what wires on top correspond to the ones on bottom as one side plugs into the other. Thanks.