Need help identifying cat back for AWD/FWD 2g pics inside

[Th3ory]

This looks like a FWD set up to me, but I am not 100% sure. There needs to be a bend in the last tail pipe section to bend around the rear diff on an AWD. Any ideas???

 

[88blazer1297]

I believe the FWD has a sharp bend where is goes around the fuel tank. AWD is more straight like the one pictured and goes along the drive shaft and through the hump in the middle AWD fuel tank next to the diff. Then the muffler exits in the stock location but at an angle.

 

[eSpyder407]

I agree with blazer, I took this pick of mine the other day... Hard to see but the sharp bend to the right is there toward the back. This is a GST

You must be logged in to view this image or video.

 

[Th3ory]

http://www.extremepsi.com/store/product.php?productid=20716&cat=1472&page=1

If you sift threw the pictures, it appears there is a few bends in the tail pipe section. The pictures I posted in the first post are of a megan system, I wonder why they look different? They both claim to be 2g Megan cat back, just look different.

 

[TunedUp]

This looks identical to my 1gb AWD Megan exhaust.

 

[Th3ory]

Yeah, I have been trying to figure this out for awhile now.

http://www.dsmtuners.com/threads/angle-on-megan-exhaust.329611/ , here is a picture that looks the same as my original posted pictures.

Maybe Megan had two versions. I am trying to figure this out, and the pictures I posted are of a system for sell, and I would like to get it, however, it didn't math the pictures of the Megan system off of extreampsi. But it does in this link??? idk the more I look into this, the more it looks like a 1g

 

[TunedUp]

Yeah I bought the one off extremepsi and the picture doesn't do it justice. It looks exactly like the one you posted in the original post.

 

[Talon96fwd]

That's for a AWD. Here's my FWD exhaust see the bends??

 

[twelve_1686]

Gst bends around fuel tank, they don't look like the one in your pictures.

 

[88blazer1297]

With the hangars pointing up does the muffler go to the passenger side or drivers side? It needs to exit on the drivers side to be a 2g. I'm sure it's awd not sure it's 2g. Looks like it could be a 1g they exit on the passenger side.

 

[Th3ory]

With the hangers pointing up, it looks like exit driver side?

 

[88blazer1297]

I would say it's a 2g awd then.

 

[88blazer1297]

It looks to me like in the first picture it shoots to the passenger side like a 1g I can't tell in the 2nd picture where it's not bolted together

 

[Th3ory]

It looks to me like in the first picture it shoots to the passenger side like a 1g I can't tell in the 2nd picture where it's not bolted together

I see what your saying, but the hanger looks to pointing down right?

 

[88blazer1297]

It looks right side up in the picture. Hook hangars are above the pipe a the front one loops underneath. That's how all the ones I have seen are set up.

 

[Th3ory]

It looks right side up in the picture. Hook hangars are above the pipe a the front one loops underneath. That's how all the ones I have seen are set up.

ok Thank you

 

[SOADweskey]

Just adding this if it helps you out. Both of the exhausts in these pictures are for 2G AWD.

You must be logged in to view this image or video.

You must be logged in to view this image or video.