my first build and 6 bolt swap

[skeeter4200]

IF you ever need to be able to put your car in the air let me know we have a good car care center on FT Lewis and I am more than willing to help another dsmer out

 

[2point3Tsi]

as for tuning lucas english hooked me up with a street tune for cheap at a dyno shoot out and andre at pina did my bottom end. Andre tunes dsmlink just fine from what I've seen its just that lucas gave me the right price. both people are extremely knowledgable and helpful to me on more than one occasion, heck I even help andre with parts from time to time

 

[blkwidow]

Nice build man. I hope to see it around Lakewood.

 

[skeeter4200]

wooop, if you wanna cruise down to English ill roll with you , I should be back the first week of may or so and I have to install my dsm link as well and get it tuned with the new injectors i got and all the other stuff that ive purchased since being in Iraq hahahah should be good times

 

[woooop]

 

[erald01]

Looks good..nothing looks good on a car than a clean engine bay with a monster in it

 

[woooop]

I need to get a oil cooler so i l can prime this thing !

 

[woooop]

No one knows where that wire i was talking about plugs in to ? I need help some one go outside and look please !

 

[woooop]

I think i ned to swap my coils on my cop because i going from a 97 ecu to a 95 with dsm link any one know what the firing order a 97 and 95 are so i can swap the coils around ?

 

[alice]

I think this might be what you are looking for.
swapplugwires [ECMTuning - wiki]

Also, is this your Os dump circled in yellow?

 

[woooop]

Yes it is. I know its close,i had to cut the shit out of my lower intercooler pipe and the dump to make it fit.

 

[woooop]

Where is the underhood Ignition Power Transistor connector that has the 2 whires i need to swap. Shit i thought it was as easy as swapying the coils around. Any one have a pic?

 

[turbosax2]

Interchange the Black/Blue wire from ECU pin 10 with the Brown/Red wire from ECU pin 23.

See here for an ecu pinout:
http://www.dsmtuners.com/forums/articles-tuning-ecu/281763-2g-turbo-ecu-pinout-w-wire-colors.html


See here for how to remove pins from the ecu connectors:
http://www.dsmtuners.com/forums/art...ce-pins-harness-connectors.html#post151392260

 

[woooop]

Wow thank you. Glad i didnt just swap coils and try to fire her up. Ok ill swap the two wires when i get my ecu back. Thanks you guys.

 

[woooop]

got some more stuff

 

[gsxtasy]

Don't know if i would trust that one little bolt to hold that thing on.

 

[woooop]

its just a mock up , im not done yet

 

[Falcon55]

You do have a nice setup. I admire how it's all clean as if you went in a time machine then came back with everything looking fresh. The part that sucks though is it will all get dirty eventually, unless you constantly maintain it (which I guess you don't have a problem doing). Nice job! As for the person (VETTE_50_TH) that said you have a stock turbo, nope. Looks like an Evo 16G to me. Ive looked at T25's far too much already to tell that woooop's isn't a stock turbo.

 

[skeeter4200]

you dont need another fuel pump , one 255lph with re-wire will support more than enough fuel than your 16g can push ,,,,,,just my .02 where you going to get your car tuned pina or english

 

[Falcon55]

Question, how much did it cost you for the 6 bolt swap? I don't have crankwalk, but it's always good to be prepared just in case...

 

[woooop]

i did all the work except the block so it came to about 10gs give or take, and I'm going to try pina. and yes i need another fuel pump, I'm going to go with a dual setup because i have a 20g in the house I'm going to put in after i break her in

 

[skeeter4200]

you have the BR stage 3 block and head right . man your gonna have some fun in this thing

 

[woooop]

I got the work done at ped and i assembled the rest of it. And yes the block is from br.

 

[woooop]

Ya it’s on river road in Puyallup. They do great work. It looks like a small shop but when you go down stairs it’s a whole lot bigger. And they do allot of work on 4g63's.

 

[woooop]

got more done today. got my dsm link and my fuel lines. I primed it and put the timing belt on, the tensioner my be too tight but i think itl be ok.