MBC install with evoIII

[e1337]

im trying to get MBC to work with my evoIII. i have the wastegate connected, but i have no other nipple on my turbo for the other side to plug into, i have a nipple on my j pipe, will that work as well? yes no.. maybe so?

 

[psychlow]

The J-pipe nipple is the stock boost source on the 1G.

 

[e1337]

so its cool to attach it there? ive seen a pic of a 16g with a nipple actually on the turbo, but sence mine dosent have it, can i attach it there? dont wanna blow something up :thumbdown

 

[psychlow]

That'll work just fine.

 

[e1337]

thanks!

 

[Dieselboy]

You can use that or the vacuum line to the BOV.

 

[psychlow]

You can use that or the vacuum line to the BOV.

Derek speaks the truth.

Personally, I prefer the BOV line, and I should have mentioned that before. When you close the throttle plate, it'll show vacuum on that line, which will close the wastegate. This will help (a little) to keep the turbo spooled during shifts.

MHO.

 

[Eclipse96Ryder]

i have mine on my j-pipe nipple...it works great.

 

[98RedGs]

Derek speaks the truth.

Personally, I prefer the BOV line, and I should have mentioned that before. When you close the throttle plate, it'll show vacuum on that line, which will close the wastegate. This will help (a little) to keep the turbo spooled during shifts.

MHO.

http://www.belitski.com/cars/talonmods/turbo/vfaqhallman.html
I say "T" the line on the bov also.