Looking for pics of your AFPR Install

[Stoner]

I just got the aeromotive afpr, guage, and s/s return line install kit from slowboy. I have a few ideas on where I am going to install it but I would like to see what you did.

Thanks,
Ben

 

[DSMunknown]

Hmm, yeah I dunno that's where it ended up for 43psi.

I must be losing it. I thought mine was higher than what it actually is, without popping the hood in the frigid cold. Just looked through one of my old threads here to confirm the height of the screw. Mine's about the same.

 

[alice]

Here is mine, just finished it up. Looks pretty good I think. The SS line rubs a little so I have to get one of those brackets with the rubber on the inside to hold on to it. Similar to the brackets that come with most MBC like the Hallman Pro. I still have to paint the brackets too and clean up the area a bit.

 

[rogergoochman]

I know im digging this thread from the dead. But i finished my install yesterday and thought i would save everyone with out starting a new thread.

You must be logged in to view this image or video.

 

[forcedfed69]

<a href="http://s49.photobucket.com/albums/f254/boostedgtiguy/?action=view&current=DSCF4695.jpg" target="_blank"><img src="http://i49.photobucket.com/albums/f254/boostedgtiguy/DSCF4695.jpg" border="0" alt="Photobucket"></a>

<a href="http://s49.photobucket.com/albums/f254/boostedgtiguy/?action=view&current=DSCF4697.jpg" target="_blank"><img src="http://i49.photobucket.com/albums/f254/boostedgtiguy/DSCF4697.jpg" border="0" alt="Photobucket"></a>

<a href="http://s49.photobucket.com/albums/f254/boostedgtiguy/?action=view&current=DSCF4696.jpg" target="_blank"><img src="http://i49.photobucket.com/albums/f254/boostedgtiguy/DSCF4696.jpg" border="0" alt="Photobucket"></a>
Here is a pic of my install. i can't post on bolt on tech yet. Any questions i'd be happy to answer.

 

[Novice]

Nice, looks pretty sweet.

 

[romeen]

Good job on mounting the regulator, looks very clean. However, it would be a good idea to make the SS line from fuel rail to FPR a little longer (slight "S" shape) to allow for engine movement.

 

[lowandsleekDSM]

Looking good there! Might have to steal that idea since i have a front strut bar too.....nice job

 

[fwdmaster]

Clean set-up

 

[forcedfed69]

Thanks guys Good idea with the slight s turn in the ss hose. just didn't think about that thought the engine only torqued back toward the fire wall?

 

[pj91gsx]

Good Choice. I like fuelab afprs.

 

[ali]

looks good

 

[DSMunknown]

Here is what I was talking about in post 180.


KOUL tools, LLC - Lake Havasu City, AZ

 

[Black94DSM]

Thanks for the heads up Anthony! I actually sold the Koul Tool when I was working for Ramchargers/Detroit Speed Shops. They do make installing SS hose into the Fittings much easier, but they are costly!

I would say this tool would be for somebody that installs these lines for more than just a single car/few lines.

They are around 80 bucks if I remember correctly.

Sorry I don't have a picture of my Install. I'm going to move it anyways when the car is up and running again.

 

[need2boostpsi]

my location, has to extend the line that came with the kit and drill another hole in the mounting plate.

 

[92AWDHX40]

No pics yet but i have mine located on the firewall where the cruise control was located.

 

[thewombis]

You must be logged in to view this image or video.

 

[Hubbard 0]

I thought I posted mine already, but I guess not. Pictures aren't awesome, but once I get my good ones I'll put them up.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

 

[GalantGreg]

To anyone with FPR's posts some pics of where and how you mounted yours. I'm keeping my cruise control, and I'm running into some fitment/placement issues.

 

[->PrOjEcTGS<-]

This was on my Panda: (haven't ponied up for an FPR yet on this DSM)

Bent the bracket that mounts to the FPR and bent the bracket that holds the solenoids onto the firewall and drilled some holes in it.

 

[khartley]

search button still works
http://www.dsmtuners.com/forums/newbie-forum/159461-looking-pics-your-afpr-install.html

 

[Drifte]

My old setup. Dont have any pics of my car with cruise control still on. But I think I mounted it in about the same place.

 

[GalantGreg]

PrOjEcTGS, I like how you have yours mounted. You still have the cruise control box in there?

 

[PIMking]

PrOjEcTGS, I like how you have yours mounted. You still have the cruise control box in there?

Nope, That is were the stock FP solenoid sits.

How did that work unplugging them? Did it turn on you CEL?

I'm trying to figure out were to mount my fuelab FPR at I cant seem to find were I can mount it.

 

[ed_dogg23]

The fpr is next to the brake booster. I relocated the small fuse box just next to the power steering resivor. Good luck!

 

[GalantGreg]

Nope, That is were the stock FP solenoid sits.

How did that work unplugging them? Did it turn on you CEL?

I'm trying to figure out were to mount my fuelab FPR at I cant seem to find were I can mount it.

I haven't started the motor yet. I'll be using DSM link to turn off the FP solenoids.