look at this head rebuild kit

[JStrateger]

I'd call AMS and see if they have any used oem evo lifters, I got mine for 75 shipped for the entire set. They are the revised oem lifters. You can't beat oem and it's worth a shot.

 

[Jerkychew]

Screw the ebay guy... call SB international. They deal with cylinder head parts and you can just request the same setup and save some money. They have a distribution center in Phily. That's probably where he got the parts in the first place. Thats where I've always gotten my parts. Why pay the middle man?

 

[Aproductions]

I'd call AMS and see if they have any used oem evo lifters, I got mine for 75 shipped for the entire set. They are the revised oem lifters. You can't beat oem and it's worth a shot.

the topline ones are revised too with the 3mm oil holes

 

[Karnag3_0kc]

If it's tested and works for other members. Give it a shot.

 

[BogusSVO]

wait so should I go 1mm over and I shouldn't use those bronze valve guides?

I would say Iron guides and +1mm valve that are installed properly.....

 

[Aproductions]

I can get EPN SS valves, guides and lifters from engnbldr and ferrea seals for about $240

or I can get EPN guides, topline lifters, PEP SS valves, and ITM seals for $200


basically the valves and seals are the only differences.




Are the ferrea seals that much better than the ITM ones?

and what about the EPN valves vs the PEP ones?