is this cyclone mani screwed

[TimF]

Got this cyclone intake off a spare motor I picked up. I noticed that a port was filled with jb weld or some kind of epoxy. I am assuming that port was for the actuator to switch runners. So is this mani essentially screwed?

You must be logged in to view this image or video.

 

[ThunderChild]

Kinda looks that way, have to disassemble it further to see if the valves are gone or just locked in place. I think I still have the shafts and butterflies out of one of mine I took apart, but the bushings the shaft rides on are the tricky part.

If it's toast, I may be interested in it if you don't want it anymore

 

[motomattx]

My buddy has one in his garage with no actuator for like $50 or something.

 

[TimF]

I will just crack it open when i have time and check it out. I been busy with 3 dsms apart and working on my evo.

 

[TimF]

Kinda looks that way, have to disassemble it further to see if the valves are gone or just locked in place. I think I still have the shafts and butterflies out of one of mine I took apart, but the bushings the shaft rides on are the tricky part.

If it's toast, I may be interested in it if you don't want it anymore

If any thing it will make a good wall ornament