Is this a good price for the 2.4 stroker motor???

[1997RS]

I was given a quote on the 2.4 stroker from 3200 - 3500 dollars what do you guys here think i should do rebuild for 2700 or go all out and stroker my lil 4g63??? Keeping in mind that this is the price for just the bottom end and not the top end Thanks Guys. If there's a better price please let me know of any web site or someone who can offer me a better deal if this is not thanks.

George

 

[Got Rice Galant]

How bout getting a 2.4L SOHC (4G64) out of a 7th Gen Galant (94-98) and go with low compressing pistons. The 2.0L (4G63T) DOHC head bolts right on after filling 4 water jackets which you can place the 4G63 head gasket on and see which ones need to be filled. I know this is a 7 bolt but if you want to do some research on older Mitsubishi expo's they may have come 6 bolt.
Just my $.02.
Hope this helps!
P.S. The rods are the same on both motor's but the pistons are different. The wrist pin location on the pistons are different and the 4G64's compression is 9.0-1

 

[ITSME4G63]

there is one place, that will sell you that combination mentioned in the thread above, for 1350$ shipped to your house, but you have to give your core, shipping is paid for already to and from your house, I would post the name but its best if you pm me for it cuz I don't want the mods to get sandy vaginas

 

[blaster1812]

http://www.rpmrons.com/Hyundaiengines.html

2.4L G4CS
No core charge

 

[1997RS]

would a block from this year hunday 89-91 SONATA 4CYL 2.4L good for our 2.4L set up??? I found it for 400.00 let me know so that I can take action. Thanks All.

George