Resolved installing lc2 wideband not logging in Ecmlink?

[Wanagofast]

I have all the major wiring done..

Done:
red to 12v
black to ground
lighting wires

Everything works except i can't fine the wideband in Ecmlink

Connected the brown to DB and pin 76 but its still not seen in ecmlink? Does it have to be wired to the yellow (0v-5v) or brown to simulate Narrowband?

Could it be because its not grounded to the Ecu's ground vs the body?

 

[snowborder714]

The yellow wire for the LC-2 is the 0-5v output, so this is the one you should be using to the gauge and to input to ECMlink (if using v3). The brown wire is the 0.1-1.1v narrowband sim wire.

 

[Wanagofast]

Alright, thank you for clearing that up for me!