Injectors dont fit - I think they are modded - Take A LOOK!

[GSXeclipsePSI]

Hey I got these injectors from another dsm'er and I think they been modified to fit another car.

Can you take a look at the photos. When I put them in the fuel rail and put the connectors on they don't sit correctly the fuel rail comes down too far. I'm using a 2g fuel rail.

As I can see from online photos of other PTE injectors it looks like I'm missing plastic on the top of the injectors and at the bottom. I also have this black plastic nipple thingy on bottom.

Thanks for the help.

You must be logged in to view this image or video.

 

[steve]

You need the injector sheet that fits above the little step and the fuel rail. It keeps the injector from sliding too far into the rail and allows the rail to hold the injector in the head.

http://www.dsmtuners.com/forums/bolt-tech/316664-injector-install-question.html#post151684232
http://www.dsmtuners.com/forums/newbie-forum/251027-isc-issues.html#post151108604

 

[GSXeclipsePSI]

Do I keep that black nipple thing on the bottom? I haven't seen anyone's PTE's so far with that still on.

 

[95gst16g]

Looks identical to mine.The little black thing on the bottom of mine is chipped up on a couple but its still on there.

 

[GSXeclipsePSI]

ok thanks

 

[95gst16g]

Not a problem.Here is a link to my myspace page it is a picture of my 1000's before they were ever used


car Photo Gallery - Photo 5 of 22 by dustan - MySpace Photos

 

[whe3ls]

looks like you need lower seals and upper seals

here are my pte 880's with new seals

You must be logged in to view this image or video.