Im trying to install a FPR. A vortech

[sadc]

Hey guys whats going on? Name is stephen and i have a 97 rs-t eclipse with a 420a motor and saying hi from all the way down here in hawaii!!! Anyways back to topic
Im trying to install a FPR. A vortech FPR to be exact. I cant see to find where to put the two hoses. I know on the top part of the fpr is the VAC source. But no idea on where to get my lines from so if anyone knows how to please let me know. Oh yea i know i can use it in my engine bay instead of in the back by the fuel pump. thanks

stephen

 

[4UH8ERS]

Hey guys whats going on? Name is stephen and i have a 97 rs-t eclipse with a 420a motor and saying hi from all the way down here in hawaii!!! Anyways back to topic
Im trying to install a FPR. A vortech FPR to be exact. I cant see to find where to put the two hoses. I know on the top part of the fpr is the VAC source. But no idea on where to get my lines from so if anyone knows how to please let me know. Oh yea i know i can use it in my engine bay instead of in the back by the fuel pump. thanks

stephen

http://www.dsmtuners.com/forums/420a-turbo-conversion/188926-fmu-install-s.html

 

[RSTeclipse97]

If your are refering to an fmu if you didnt get your answer from the above site its actually pretty simple. I have a 97 and my original regulator is at the back of the car as should yours be. Mounted in the engine bay and ran 2 braided lines to the back of the car. Cut your exhisting hose and install braided line from the side of the fmu to the regulator side and the bottom line to the hose still connected to the tank and thats it, hope this helps