I'm stuck identifying a turbonetics turbo

[newtodsm's]

Ok i have searched for about 2 hours now and i cant find out what turbo this is. I bought it off ebay just so i could get the wastegate that came with it. I figured i might be able to make a dollar or 2 on selling the rest of the stuff. The turbo is a turbonetics turbo the measurements im getting are- Compressor wheel exducer 3.00 inducer 2.272. exhaust wheel- Inducer 2.551 exducer 2.229. the inlet on the housing is 2 3/4 inch. If anyone could help me or point me in the right direction I would appreciate it. Thanks

 

[aero_sallee]

Ok i have searched for about 2 hours now and i cant find out what turbo this is. I bought it off ebay just so i could get the wastegate that came with it. I figured i might be able to make a dollar or 2 on selling the rest of the stuff. The turbo is a turbonetics turbo the measurements im getting are- Compressor wheel exducer 3.00 inducer 2.272. exhaust wheel- Inducer 2.551 exducer 2.229. the inlet on the housing is 2 3/4 inch. If anyone could help me or point me in the right direction I would appreciate it. Thanks

Are there any part numbers on it?
Turbonetics 2009 Catalog

The turbonetics catalog. The inlet size says its a TO4B compressor cover.

Page 34-35 has the compressor wheels on it. Does the compressor have a even number of blades or odd? A uneven number will make your inducer measurements off a bit.

 

[JusMX141]

57-trim compressor inducer is 2.23", 60-trim is 2.29"....I'm guessing yours is the 60-trim mated to a T31 turbine.

 

[newtodsm's]

I will have to check out that page when I get home. thanks for the help. I emailed turbonetics and they told me to look at pages 44-45 so I will go through there catalog tonight. Thanks for the help

 

[Red Alert]

Register on the Turbonetics forum and post the serial number in this section

Tech Support - Turbonetics Owners Club & Forum

and they will identify it pretty quick. I posted my request at about 9:30 at night and by 9:30 the next morning I had an answer...

EDIT: Or if you can get me the serial number I'll ask for you.

 

[newtodsm's]

I will try that right now. I gave turbonetics the serial number and they said it was to old to identify by that serial number

When I got home last night I did some more measureing. It looks like it is the 60 trim. I looked closer at the compressor cover and it is stamped 60-1 hifi. Did they use they same compressor covers on a few different turbos? If i take the compressor wheel off would there be any numbers stamped on the backside?