how would I fix sagging door on my eclipse?

[Sepison]

Please..looking for detailed pics of fix not that you saw it done but in detail if possible thank you prefer pics by the way

 

[rydereclipse]

Sagging door? The panel or the actual door? If it is something that is bent that severely on the door, I would fear structurual damage.

 

[TSicktalon]

Never checked on these cars, but a lot of vehicles have brass bushings in the door hinges. Go to a parts store and you can find them in the help section. Easy peasy to change out.

 

[Sepison]

I'm talking about the whole door not the panels

Never checked on these cars, but a lot of vehicles have brass bushings in the door hinges. Go to a parts store and you can find them in the help section. Easy peasy to change out.

I've asked the parts people at a local parts store and they came up with nothing..but anyone else have any input on this?

 

[jdxnc]

You can also take the fender off and adjust the hinge. The door pins themselves wear too, you can usually get away for a while anyway by adjusting it.

 

[Sepison]

you mean like move the whole door up or down? seems like that is my issue

 

[jdxnc]

Yes, the holes in the hinges are slotted to allow for movement.

 

[Sepison]

ok i'll look at them later today you also said there are pins that could be replaced where could I find those? parts store?

 

[Diamond Star Werks]

Look at where the hinge bolts into the body. If the the door pins are good then its probably breaking out of the body.

 

[turbotomBoost]

Loosen the door hinges (which should be lose or bent which is causing the saging) have someone hold the door straight while you tighten it back up.

 

[91-GS]

How bad is it sagging?

If just a little, and you are doing it alone:
Take off the fender, shut the door, loosen the hinges, add a shim to push the door up a little on the back (latch does allow for some movement), tighten the hinges, re-install the fender.

 

[Sepison]

Got it thanks!