How do I install a boost gauge [gage, guage] on a 1g, 2g? [ merged ]

[Dert]

the vacuum line off the fuel pressure soliniod or the "P" line at the throttle body, I believe its the left line or if your lines are still stock it will have a green stripe with a "P" on it

 

[AWD Night rider]

Just put a T in the vaccum line that goes from the fuel pressure regulator solenoid to the intake manifold,Ihooked up mine there abuot two years ago and it's been working fine.

 

[smokeyjpn221]

ok guys thanks for the help!

 

[dikdiamond]

Dert and AWD Night Rider are correct,and here is the tutorial I used.

http://www.dsmtuners.com/forums/articles-turbo-system-intercooler/205099-boost-gauge-install-where-tap-source.html

I also zip-tied the lines to the 't' after they blew apart a few times. They haven't came off since. Good luck!

 

[smokeyjpn221]

Dert and AWD Night Rider are correct,and here is the tutorial I used.

http://www.dsmtuners.com/forums/articles-turbo-system-intercooler/205099-boost-gauge-install-where-tap-source.html

I also zip-tied the lines to the 't' after they blew apart a few times. They haven't came off since. Good luck!

thanks man

 

[misterskeetz]

I am looking for a picture showing how to get the wires down behind the dash from the pillar. There is a space by where the weather stripping was on the stock a-pillar panel.Is there any way to get more room to shove the wires down? I need illumination!