going to be putting a FMIC on, but im not sure what size to get?

[93AWDDSM]

ok, im going to be putting a FMIC on, but im not sure what size to get?

im only gonna have the 14b on there.

but any suggestions please?

 

[98gsxtuner]

My install was based completely on the instructions i posted above.

 

[98gsxtuner]

You know what guys? I just realized that were talking about a 1g here.....WOW i feel dumb I'm not sure if autochrome makes a kit for the 1g.

 

[93AWDDSM]

any 1g threads on doing a ebay FMIC?

 

[PIMking]

I would def go with a big one then if thats what your going to do, but pay attention to how much horse power it says it can hold, exp: don't by a FMIC kit that is only rated for 400hp if your going to be building a 500hp car, and how much boost that there rated for.

UGHH...

That makes no sense. Thats a selling ploy to newbies like yourself.

The fact is a 16g flows less air than a 20G does at 15psi.

So that 20g at 15psi is flowing more air and that ='s more hp.

This kit is only $300 and that will do well for most people on here.
DSM INTERCOOLER KIT 1990 - 1994 1ST GEN 4G63, Mitsubishi Intercooler Kits, XS Power Inc.


Alot of people use a Ebay core and pipes just make sure you have your pipes beaded because the couplers will pop off. Or check the custom fab section about how to make a bead roller.

 

[98gsxtuner]

So ## telling me that if it says it can only withstand 400hp there lying to me and it can hold more or what.### the one i got said it could only take like 400.

 

[98gsxtuner]

UGHH...

That makes no sense. Thats a selling ploy to newbies like yourself.

The fact is a 16g flows less air than a 20G does at 15psi.

So that 20g at 15psi is flowing more air and that ='s more hp.

This kit is only $300 and that will do well for most people on here.
DSM INTERCOOLER KIT 1990 - 1994 1ST GEN 4G63, Mitsubishi Intercooler Kits, XS Power Inc.


Alot of people use a Ebay core and pipes just make sure you have your pipes beaded because the couplers will pop off. Or check the custom fab section about how to make a bead roller.

Thats exactly y I'm on this site so i can learn about this i know a little but not the technical stuff. I'm only 19 I graduated 2 years ago I wanted to go to college for automotive tech, but couldn't because i had a child a year out of highschool and a wife and didn't have the money. So i'm on here to learn from people like you PIMking.

 

[PIMking]

Thats exactly y I'm on this site so i can learn about this i know a little but not the technical stuff. I'm only 19 I graduated 2 years ago I wanted to go to college for automotive tech, but couldn't because i had a child a year out of highschool and a wife and didn't have the money. So i'm on here to learn from people like you PIMking.

I wasn't trying to belittle you or make you feel stupid. At least your taking the time and try to learn things thats all a big plus for everyone because some time in the future someone is going to ask a question about something and your going to know what your talking about.

I have learned alot through research and great people on this site 1992awdlaser, MrBoxx, Jusumex or how ever you spell it. But not everyone has to be a mod or a wiseman. I bet someone has something on this site to benifit someone else in some sort of way. Keep up the good work.

 

[98gsxtuner]

Thanks alot man i look up to all you guys when i see threads talking about wideband o2,external wastegates,o2 dumps,fpr,and how to tune. I know i may ask stupid questions sumtimes or ask a question i could search in the forums but i do it ### it helps me learn better. SO THANKS EVERYONE THAT HAS HELPED ME AND BEEN SUPORTIVE. PIMking are you going to the dsm meet in des moins this summer?

 

[PIMking]

Thanks alot man i look up to all you guys when i see threads talking about wideband o2,external wastegates,o2 dumps,fpr,and how to tune. I know i may ask stupid questions sumtimes or ask a question i could search in the forums but i do it ### it helps me learn better. SO THANKS EVERYONE THAT HAS HELPED ME AND BEEN SUPORTIVE. PIMking are you going to the dsm meet in des moins this summer?

I will make it to one. I'm moving to Bama in august. I plan on having the badest DSM there. (at the meet in des moines)

 

[98gsxtuner]

i got fam in bama ROLL THE TIDE!!!!!!!!!!!!! I'm a total bama fan dude.

 

[PIMking]

i got fam in bama ROLL THE TIDE!!!!!!!!!!!!! I'm a total bama fan dude.

I'm sorry, I really feel bad for you. I grew up in Florida. GO GATORS. It will be fun back in gods country agian down to the good ole south.

 

[98gsxtuner]

Ha Ha whats the likely hood of that happining, ya I'm originally from Huntington county tennesse i really wish i could make it back there sumday i love the south everyone is so nice.

 

[zachsEVO3]

I don't know what other people b postin' but I run my ported & clipped big 16G@20psi off a DEJON | Powerhouse super sidemount with great response and sort of a sleeper look. I feel a good push staring at 3200. If you do have a 14b is a front mount worth it? Ionno someone educate me. I guess the smaller intercoolers can have heat-soak problems so i always thought methanol wouldn't be a bad idea...an adjustable one...oh yeah

 

[PIMking]

I don't know what other people b postin' but I run my ported & clipped big 16G off a DEJON | Powerhouse super sidemount with great response and sort of a sleeper look. If you do have a 14b is a front mount worth it?

a 14b is a upgrade for the 2g guys. But why not? really getting that compressed air colder is always a good thing. It will cause some lag but if your fwd that would help you.

 

[93AWDDSM]

this is how im going to try and run my future setup.

i was gonna try this, stock 450 injectors with methanol to keep it cool, running 18 lbs with maft to tune. could i keep the SMIC or do you guys think it would heatsoak?

 

[LTUDSM]

<a href="http://s136.photobucket.com/albums/q184/marka_bucket/?action=view&current=l_bc3670a6fdde1d1f23ab31a9f3b0ea93.jpg" target="_blank"><img src="http://i136.photobucket.com/albums/q184/marka_bucket/l_bc3670a6fdde1d1f23ab31a9f3b0ea93.jpg" border="0" alt="Photobucket"></a>

Bolt on,only requires,to cut some metal,to get the piping through the sides.....

<a href="http://s136.photobucket.com/albums/q184/marka_bucket/?action=view&current=Image057.jpg" target="_blank"><img src="http://i136.photobucket.com/albums/q184/marka_bucket/Image057.jpg" border="0" alt="Photobucket"></a>