Fuel line clearances

[TimF]

I noticed today that my Fuel feed wont attach to my rail with that bracket that connects the CAS and the TB in the way. Now outside of maybe buying a 90* fitting I was wondering what exactly is that bracket for ? and could I just remove it and use spacers on the TB. I am also wondering if I would be fine running my FPR regulator like this since I an relocating my coil pack, if I would have any problems with belt clearances.

I was going to take of that 90* and get a straight fitting to the gauge will face the driver side of the car, and use that 90 to come out the bottom and go to my stock fuel return location.

 

[curt-s]

Most either grind away most of the bracket to clear or just get rid of the bracket altogether. It's rare that I even see them anymore, yet I still have one kicking around. A relic, really.

 

[1990dsmkid]

just remove it. As far as I know its just a lifting point to use for engine removal and like previously stated they are rare to still see

 

[hhuricane]

I just used a 45 degree fitting on mine. Clears the bracket just fine.