The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Fuel injector cleaning

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

92_talonGsXt

10+ Year Contributor
117
1
Jan 1, 2009
lake forest, California
I just picked up a set of of evo 510 injectors and wanted to get them flow balanced and ultrasonic cleaned and was wondering if anybody on here offer that service?
 
Not to thread jack but how do you get at the fuel injectors in our cars? I need to check mine and clean them.

Relieve the pressure in the system by unplugging the fuel pump and cranking the car a few times. Unbolt the fuel feed and remove the return line. unplug the injectors. Remove the 2 hold down bolts on the rail. Pull up on it and it should pop right out. MAKE SURE YOU DON"T LOOSE THE SPACERS THAT SIT ON THE MANIFOLD. Those things can be a pain to keep track of and can really pup a damper on your project when you lose one in the motor. Make sure you have all new seals and o-rings to put on them back in the rail/manifold. I keep about ten spacers around for myself, but then again I've swapped these injectors left and right :ohdamn: You never know.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

Back
Top