(For my eclipse) RX7 Cigarette lighter NOS Switch help me please

[Eclipse45150]

Ok I know everyone has seen the fast and the furious, I cant seem to find a place that sells the cigarette lighter that popped out in vin deisels rx7 for his nos. I want to find one to hook to a purge system for cry02 but cant find one, any Ideas of where to get it or if you have one where you got it?

 

[E116]

Wasnt it an a/c button that he pushed? I have no idea where to find something like that though.

 

[Eclipse98Spyder]

It was the a/c button and it was all show

 

[Eclipse45150]

Thats cool, well Ican modify a component to have a switch I just cant make something to pop out like that, any idea if you can buy that or did hollywood make it

 

[Nonrml4]

Thats cool, well Ican modify a component to have a switch I just cant make something to pop out like that, any idea if you can buy that or did hollywood make it

I believe it was custom made. I cant even think of a way that I could make one to be small enough. I have a co2 system and my switch for it is located in the flip top holder in the center console. I dont know if you've thought about that at all?

 

[v8killar]

I hooked up another switch for my dual stage boost controller, in the empty spot under the hazard light switch in the dash. so it looks like i have three stock bottons and when i push it in it raises the boost to 16 psi, when it's out it's 11psi.

 

[Eclipse45150]

Both of thoseideas sounds good and thank you for the input, Im just trying to get the final touches on my car before cavalcade so I need so really rare things to stand out but I might try those, thanks again

 

[freshlane]

It was the A/C button and it was custom. I will see if I can find out for you. My buddy was a camera man for the 2nd one. Mayb he would be able to get in contact with the owner.

 

[redeclipse7782]

Why not just use the factory AC button? Remove the AC components if you havent already. Pull out the radio, reach up and unplug the harness going into the back of the AC button. Find out which wire does what, cut the wire, and splice in the wire for whatever you want it to do. You even have the green light on the button to let you know if the nos is armed, or whatever else is on/off that you hook up to it.