The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

First 3rd gear log

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

1twistdtalon

10+ Year Contributor
280
3
Dec 17, 2009
Gregory, South Dakota
Here is my first 3rd gear log. I am just starting out on using the link and have read all the WiKi pages on ECUTuning. Any help would be awesome.

Thank you
You must be logged in to view this image or video.
 

Attachments

You must be registered for see attachments list
Last edited by a moderator:
I see in your profile that you have 650's which brand? your injector duty cycle is rather high. Also why ain't you logging your lc-1 in the log? Also a map sensor would help to know how much boost your pushing. You should have a few more items captured like LTFT lo,mid,high also STFT as well as mafraw.
 
ok i will re do a log with those items added. i dont have the lc-1 hooked up yet. i will this week. and they are FIC injectors. i am running 93octain and 15psi of boost. sorry for the newby ness.

how do you add those values? they are not there when i hot f9.
 
Also i did not see a fuel pump in your profile. You should at least do a rewire if you can't afford a new pump.

As for adding the values you first click F10 add them to captured after that then click F9 and add them to display. I'm assuming since they aren't being logged your LTFT were never adjusted so i would get that in cheek first before doing any WOT tuning.
 
how do you add those values. i dont see them when i hit f9

thank you

also i have a ND 190 fuel pump re wired.

ok like i said im new. what is the best way to get those in check.? thank you for the help

i have them caputered now how do i go about tuning them?

You must be logged in to view this image or video.


this is a log at idle and slow cruise. how do i dial in my lo,mid,high LTFT and my MAFRAW is way off i think. help please:coy:

Here is another log i tired to do the combined maft adjustment. i think i need to add fuel between 3500-5000 rpm. the car really runs rough in the rpm range and wont go much more. that and ill check for a boost leak tomorrow..

let me know what you think
thanks

it let me load the log so look at it here please
http://http://www.dsmlink.com/forums/showthread.php?p=386095#post386095
 

Attachments

You must be registered for see attachments list
Last edited by a moderator:
Here is an updated 3rd gear pull with my LC-1 logged. Take a look and let me know what you think:thumb:

You must be logged in to view this image or video.
 

Attachments

You must be registered for see attachments list
Last edited by a moderator:
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

Back
Top