emission vac line removal

[rich3389]

What do I have to do to cap off these three vac lines at the throttle body, I have a few boost leaks around there and it would be so much easier just to cap them off.
<a href="http://photobucket.com" target="_blank"><img src="http://i13.photobucket.com/albums/a279/rich3389/poop.jpg" border="0" alt="Photo Sharing and Video Hosting at Photobucket"></a>

 

[snowborder714]

If you have boost leaks, I'd recommend putting zip ties around the hoses to keep them really tight on there. That's what I did for pretty much every hose in my engine bay and they don't leak any more!

 

[synthetek]

You could remove them all & cap them but if you dont have DSMLink you will probably get a CEL. Are you sure its coming from those lines? it could be coming from the biss screw and the throttle shaft seals, you can get a new o ring for the biss screw at a hardware store & mach V has the shaft seals.

 

[SonySlave]

Here is the Taboo Speed Shop 2G diagram...

http://web.archive.org/web/20040629214038/www.taboospeedshop.com/emissions1.htm

 

[spooln4fun]

+1 for the taboo speed shop! very helpful... i have a revisedone if needed ( i blew it up and re did all the words so could see an 8x11 view instead of a 4x6 view

 

[kingjust]

+1 for the taboo speed shop! very helpful... i have a revisedone if needed ( i blew it up and re did all the words so could see an 8x11 view instead of a 4x6 view

Post that bad boy!!

 

[synthetek]

Post that bad boy!!

Yes, please post it