Dsm Link Venting to atmoshpere

[RichL19]

I understand that the only way to vent you BOV to the atmoshpere without hurting performcs is with a Maf-t, Standalone or a VPC. However im wondering if its possible to vent to the atmosphere using just DSMlink and a stock MAF. I realize that there are tons of posts about venting to the atmosphere on here however there seems to be nothing about doing it with only DSMlink and a stock MAF-T. Would it be possible to tune DSMlink to vent to the atmosphere.

 

[rowlex]

I understand that the only way to vent you BOV to the atmoshpere without hurting performcs is with a Maf-t, Standalone or a VPC. However im wondering if its possible to vent to the atmosphere using just DSMlink and a stock MAF. I realize that there are tons of posts about venting to the atmosphere on here however there seems to be nothing about doing it with only DSMlink and a stock MAF-T. Would it be possible to tune DSMlink to vent to the atmosphere.

No. DSMlink has absolutly NO compensation for venting. The only way to vent properly, is, the VPC or MAF-T setup in blow-through mode.

On a side note; (and i expect to get flamed for this ) Give it a shot and see how your car runs being vented. I recently upgraded to a FMIC and the new piping made me unable to recirculate my HKS SSQV. So for the short term I am running an unrecirculated setup. I have absolutly no problems venting. However, I now have a MAF-T setup in draw through mode waiting on couplers to be attached blow-through.