Cyclone JDM intake?

[Creativemind07]

I recently came by a cyclone intake, dual board ECU , with factor coil pack. what i dont have is the white canister and the butterfly acuactor that plugs into the egr spot. need some help... where can i get the butterfly acuator? white canister too but iv seen part numbers for canisters that work...as to what they say. thanks for any input.

 

[Bud92gsx]

http://www.dsmtuners.com/forums/search.php?searchid=6880815

http://www.dsmtuners.com/forums/art...ow-properly-actuate-jdm-cyclone-manifold.html

If you got the ecu with it, you dont need the canister. The ecu will make it work by itself, i'm pretty sure..Or you could do the t25 wg mod, that works too..

 

[Creativemind07]

the ECU doesnt fix the problem of having no canister, it just activates the runners as they were intender to be with the jump in the fuel maping as they open and close. unlike the link you sent me. thats using a moded eprom with an activation switch for the runners. the white canister is a vacumum camber and the butterfly acuator is what controls the vacumum lines that opens the second set of runners at 4100rpm or 5psi. with a diaphram. no DIY home junk. I want to run this as its made to be. i know how to run the lines and how to install it. what i dont know is where do i get the butterfly silaniod that shuts the runners on and off?

 

[Bud92gsx]

I think you might need go go through the links again..Or search it yourself and find the same stuff..Good luck

 

[Bud92gsx]

One more thing, there are a couple mods you might want to look at for your super clean talon..Removing the can thing over filter, theres also a restrictive plate in the maf you should remove. and in front of the left headlight there is a plate held on by two bolts, remove to get more air..Quick easy mods for a small gain, especially cooler intake temps, and under hood. The link has them on there i think, and another cyclone fix..Articles: Intake & Exhaust - DSM Forums