Check out my new Interior Trim! *pics*

[David15151]

Ok here it is. Took me about a 1/2 hour to install. Pretty easy. Some pieces though I had to reglue as they didnt have very good adhesive.

Please excuse the fact my CD player is not mounted and just sitting in the hole. I used the face holder to cover up the top area . Thats my next project.

I bought this kit off ebay. Cost is like 70 bucks or so but the quality is good stuff. Its not viynal its like a 1/4 thick gel filled rubber stuff.. heh

 

[Deadly BlaZe]

looks great, i like it.

 

[al5dsm]

Looks real good

 

[Syndicate13]

I would like it better if it were just the piece around the outside or just the peice that goes on the HVAC panel and vents. It looks good, but a little much. One or the other would make a subtle change. My opinion though.

 

[AdoreGSX]

what are some other options for that kind of stuff?

 

[David15151]

you can get it in aluminum which is what i got.. or burlwood (that red wood stuff) or carbon fiber.

 

[FiReBReTHa]

stare at JUST the around the shifter


Sooper hawt

 

[AdoreGSX]

does the brushed aluminum look dope? anyone got any pics, the more the better.

 

[Surf Thrasher]

so Im takin it you're happy with it? i was lookin into the dash kit but i didn't know if the 3D adhesive tape would hold up, and i didnt know if it was hard to install with bubbles n what not? looks great tho!

 

[blaster1812]

Looks good

 

[David15151]

The pics are of the brushed aluminum and its not really hard to install.. just heat it up peel off the paper and apply. Some pieces I just used some superglue to make sure it would stay. Like I said.. took 1/2 hour for the whole kit. Honostly it looks much better in person then in the pics and I think its really awesome. Im interested to see if the adhesive lasts through the winter.. if it doesnt ill use a different type to hold it on.

 

[David15151]

and no.. thats not my check engine light.. or my ABS light..

 

[1998gstspyder]

going a little off topic here, but how is your shift knob sittin so low, my 2g is so freakin high...

 

[David15151]

Thats a damn good question looking at other 95 turbo interiors all the shifters are taller...
maybe when i bought my car there was a short shifter installed?

It sits low like a 1g turbo shifter... hmm

I've never driven anyone DSM so I just thought it was stock. What do you guys think?

 

[Turbo_Frog]

Yeah Im ordering this same kit, but its Real Carbon Fiber. Not the synthetic replica crap. Kit will cost $175 but it'll be more than worth it. Looks real good man, these pics just sealed the deal for me.

 

[1998gstspyder]

Thats a damn good question looking at other 95 turbo interiors all the shifters are taller...
maybe when i bought my car there was a short shifter installed?

It sits low like a 1g turbo shifter... hmm

I've never driven anyone DSM so I just thought it was stock. What do you guys think?

i always thought the short shifter was to bring the gears closer, and not the knob lower.

 

[David15151]

shows how much i know about it!

 

[AdoreGSX]

they look really good with the black leather, i'm just trying to picture them with tan leather.

 

[99gst_racer]

David - That dash kit looks very good and clean. I've been debating one for a while now. I really like my all black dash, so I'm still not sure. Did you receive your wires yet?

Thats a damn good question looking at other 95 turbo interiors all the shifters are taller...
maybe when i bought my car there was a short shifter installed?

It sits low like a 1g turbo shifter... hmm

I've never driven anyone DSM so I just thought it was stock. What do you guys think?

Yeah, it looks like it has a short shifter. My B&M sits at that level and also has a slight lean towards to left.

 

[David15151]

nope i didnt get my wires yet but should im guessing tomarrow. I am thinking of just taking off my shift boot and taking a look at the shifter to see what it is.

 

[99gst_racer]

nope i didnt get my wires yet but should im guessing tomarrow. I am thinking of just taking off my shift boot and taking a look at the shifter to see what it is.

Dont pull just the shift boot out. Trust me. The whole center counsel comes out very easily with only 6 screws.

 

[David15151]

thanks for telling me.. im not very gentle with cars. I like to just yank stuff out if it wont come easy. I like to do stuff like pull 02 sensors woot! Yeah, ill just take out that center piece.. i need to check on the audio wiring to see how the previous owner has it set up so i can run my 4 guage power wire