2G Car wont start

[Dkniight]

Hi all sorry to ask this question, probably it has been asked before, but i need help with my 2nd gen GST.

Car has been sitting for about 8 years and now it won't start. I parked the car and it was working good. I decided to put some love on it and I wanted to make sure it runs before starting to work on the cosmetic side.

Before trying to turn the car on. I clean the fuel tank. New fuel pump, fuel filter. New injectors, New battery, all new fluids, crankshaft and camshaft position sensor, but still car won't start.

I uploaded a video of the car trying to start. Please help

You must be logged in to view this image or video.

 

[saturn345]

Does it have spark. Does it have fuel coming up to injectors.
Sounds a little low on compression or timing may be off. From
Sound in video.

 

[Dkniight]

I do have spark to all cylinders. Fuel to the rail but for some reason I just noticed that the injectors are not spraying

 

[pauleyman]

That motor isn't really working that hard. sounds a little like it has no compression. Why has it been down 8 years? Did you replace timing belt and/or checked mechanical timing? If timing belt isn't moving there is no cam signal.

 

[Dkniight]

Timing belt it's moving, I was going to paint the car so I put it down got other project and kinda forgot about this one I know for 8 years it's a long time but didn't have a lot of time to work on it till now

 

[Sirius1995]

fuel pump relay or possibly bad ECU?

 

[Dkniight]

Finally!! Cars turns on. I replaced the crankshaft position sensor and it runs now. The new problem is that it won't stay one for more then 3 seconds. It would keep running if I keep pushing the gas pedal.any ideas ?

 

[Sirius1995]

Finally!! Cars turns on. I replaced the crankshaft position sensor and it runs now. The new problem is that it won't stay one for more then 3 seconds. It would keep running if I keep pushing the gas pedal.any ideas ?

IAC