Cams, springs, cam gears

[derekd]

Need a little advice on the best cams++ for a 2.3ltr PTE6466 build ?? wont be reving the life out of it so just need a little input from u guys as this is my first 4g63 build new to these engines but i will get there fast

 

[99ECLIPSEGSXDSM]

I would say 280s for that turbo with some beehive springs and AEM cam gears would fit that turbo but you said you don't want to rev it to high so im sure if you go with 272s you'll be alright

 

[Deadspool]

I'm going with a set of 280's in mine. You have the right idea being conservative wih your rpm, here is a decent thread with some realsitic input.

http://www.dsmtuners.com/forums/stroker-tech/257278-2-3-stroker-vs-rpms.html


272 would also be acceptable, here is another decent thread discussion with real world opinions.

http://www.dsmtuners.com/forums/cylinder-head-short-block/463336-2-3-stroker-cam-question.html

 

[derekd]

Thanks for the links i will have a read

 

[boost97gst]

Piston speed and side load. 2 things to remember in a stroker.

 

[DSM_GSX01]

I am going to run GSC S2 cams with there high rev springs.