cams on basic modded 2g?

[ATLDSM96]

I can get a set of 272 cams for pretty cheap is it worth putting them in? mods are in profile. i like the idle of these cams alot.im asking if its worth putting them in

 

[6 bolt dreams]

Well if your still running your stock cams then i don't see why t would hurt. There stag 1 street/strip cams so there should be a hp gain from it to. And in the end if you can bey them cheap u can always ebay them or put them up here.

 

[jaday]

If you're getting a really good deal on them, you could always pick them up, but I wouldn't install them yet. Take a look at the upgrade path on this site for a good framework. You're going to at least need a bigger exhaust and preferably a larger turbo than the t25 to really see the benefits of 272s

 

[marshall13]

Putting more agressive cams in generally hurts your low end power, but it will definitely add to your mid range. I would get them but hold off. You will get a lot more out of them once you do some more mods on the intake and exhaust sides.

 

[DsmKid98GST]

If they're a steal get them.

I wouldn't put them in until you get to the point where you're tuning.

 

[freshlane]

Save the cash and get a datalogger and a fuel pump. You will be more happy with the results. You're not using a perfectly good FPR.

 

[DGajre777]

I vote for a turbo back exhaust system next. Save the cams for last, after you get a turbo and everything else.

 

[Asimmons90GSX]

Pick em' up if your getting a good deal on them...but I would hold off putting them in as you've got plenty of other things you could do first like a full exhaust that will allow your cams to really breath. Why do you have a front mount already anyway? Your still on the stock turbo.

 

[ATLDSM96]

Because i have a evo III 16g a 190 going on in two days. but i think im gonna get them ### there dirt cheap and put them in after i get verything running properly and tuned good enough. thanks guys