2G Brake pedal switch wiring help

[ncarson91]

was wondering if anyone could show me a picture on how to plug in the connectors for the brake pedal switch for my 98 gst i forgot which wires go where rookie mistake. would be greatly appreciated or a diagram to show what color wires go where. ive been google imaging and have had no luck. and my car is non cruise by the way because i know there is a cruise hookup

 

[dustyboner]

4 pin connector with a (red/black) wire and a (green) wire

You must be logged in to view this image or video.

https://www.mediafire.com/file/6v705mm1dzx/97-99Electrical.pdf/file

 

[ncarson91]

its a four pin connector. im pretty slow when it comes to electronics

ill attach pics in a just a minute let me go outside.

 

[dustyboner]

so here is what the switch looks like. the connector that plugs into it should be white.

You must be logged in to view this image or video.

 

[ncarson91]

There isn’t a white connector just those wires I posted in this.

 

[dustyboner]

if your looking at the switch:

You must be logged in to view this image or video.

You must be logged in to view this image or video.

 

[ncarson91]

Thank you so much!!

 

[ncarson91]

if your looking at the switch:

You must be logged in to view this image or video.

You must be logged in to view this image or video.

So I did that now I have a weird issue when I press on pedal brake lights go off when I let off brake lights go on

 

[dustyboner]

maybe i fuct up and have it backwards. i'll dig out a harness real quick and check.

 

[dustyboner]

shit, sorry about that.

here is how it should be

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

 

[ncarson91]

Lol thank you once again

shit, sorry about that.

here is how it should be

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

Just want to say thank you it worked perfectly!

 

[dustyboner]

 

[pauleyman]

And this is why everyone should own a factory manual. All the circuit diagrams, connectors, locations, wire colors etc.

 

[ncarson91]

And this is why everyone should own a factory manual. All the circuit diagrams, connectors, locations, wire colors etc.

I wish but unfortunately mine didn’t come with one when I bought it.

 

[pauleyman]

I would suggest purchasing one. I'm not talking about owners manual. Phone book thick service manual.

 

[dustyboner]

you can get talon factory service manuals for cheap on ebay. right now you can get the 2 volume set for like $18 shipped. Thats the best prices i've seen.

The mitsubishi versions of the FSM cost alot more but are the only ones that have spyder specific info. (obviously since there was no convertible talon)

If you don't have a spyder, go with the talon version because the mitsu manuals come apart at the bindings very easily.

You must be logged in to view this image or video.

 

[pauleyman]

you can get talon factory service manuals for cheap on ebay. right now you can get the 2 volume set for like $18 shipped. Thats the best prices i've seen.

The mitsubishi versions of the FSM cost alot more but are the only ones that have spyder specific info. (obviously since there was no convertible talon)

If you don't have a spyder, go with the talon version because the mitsu manuals come apart at the bindings very easily.

You must be logged in to view this image or video.

I'm of the opinion the books are old. My talon manuals don't fare very well either. Even if they were unused I'm not sure how the binding would hold up. My 97 manuals were like that in 2011 but now they are coming undone.

 

[ncarson91]

well my simple answer is resolved all i was looking for.