Here is the end of the series for the rear end. Again, this has been cover, but this is a video format. The car is back together and will be getting an alignment today. I hope that everyone can benefit from what I learned.
Do NOT use any other tools to get the bushings out besides a torch. You will see that we got impatient but then latter in the video you will see that they will burn out. The metal sleeve will literally fall out. This is important because these pieces are fit to a tight tolerance and you must retain all the metal for them to fit right.
This video was produced by Jafro from Jafromobile on Youtube.
Robert
1g AWD Rear Subframe Bushing Replacement - YouTube
Do NOT use any other tools to get the bushings out besides a torch. You will see that we got impatient but then latter in the video you will see that they will burn out. The metal sleeve will literally fall out. This is important because these pieces are fit to a tight tolerance and you must retain all the metal for them to fit right.
This video was produced by Jafro from Jafromobile on Youtube.
Robert
1g AWD Rear Subframe Bushing Replacement - YouTube
