The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

  • Join the Community!

    DSMtuners is a massive archive of DSM information - but more importantly, it's a COMMUNITY! Join in and participate with other DSMers, and invite all of your DSM friends to make this place their home. Chat with others, create a build thread, post questions and answers. Get involved! Logging in will also remove many of the advertisements, along with this notice. ;) It will also allow you to view images in threads.

Please Support ExtremePSI
Please Support Rix Racing

Articles: Suspension & Brakes

Member-submitted articles related to DSM suspension and braking systems.

2G DIY - 2g DSM Staging Brake Install using 2021 parts

I will not lie, I'm not the most consistent driver - often bogging off the line which kills my...
Last edited:

DIY - Install EVO brakes (Brembo) on 2g


In November 2006 I felt sick & tired of the stock 2g GSX brakes (effectively...
Last edited by a moderator:

05/06 Outlander "BIGGer brake upgrade"

There are several good threads on this topic, but I thought I would put this into a Tech Article...
Last edited:

1G 2g Dual Piston Calipers on a 1g

I have done this to 2 of the 3 DSMs I have since I couldn't find the 1g calipers.
It is a very...

2G Fastest Way to Fix the Most Common Reason for Brake Lights NotTurning Off

Are your brake lights stuck on? Even with the key out of the ignition. The most common cause is...
Last edited:

1G Energy Suspension Hyperflex Kit 1g Fwd: Subframe Bushings Install

Click here for an overview...
Last edited by a moderator:

2G How to install Bobbys V2 Bumpsteer kit

Welcome to this little write up on installing my V2 Kit plus some little tips and advice to make...

2G Early '95 Vented Rear Brake FAQ (Discussion/PN)

This thread is for discussion of vented rear rotors unique to Early '95 AWD DSM's. Any info...
Last edited:

DIY: 2g Evo Brembo Brake Installation using brackets (clocked up) PICTURE HEAVY

I know there is a 25+ page thread on this, but i wanted to make one with all major steps of the...
Last edited:

1G 1G FWD! Suspension Techniques Rear Sway Bar Install

After doing countless hours of research on the Suspension Techniques rear sway bar for the FWD...

Removal of suspension bushes for poly bushes (or any other bushes)

While this subject is widely known its not always easy so i wanted to share away i did mine...
Last edited:

1G 1G Front Control Arm Bushing Replacement

The first step to take when replacing your front control arm bushings is to make sure you have...
Last edited by a moderator:

2G How to install Bobbys billet ARB brackets

So this write up is pretty basic really.

When you open the box please open it on a table incase...
Last edited:

2G How to install Bobbys 4 point front underbrace

Hey all.

This is just a quick install detail on installing my brace, its very simple to do...
Last edited:

2G How to depower steering rack / manual rack conversion

Here I'm going to show you have to depower your steering rack or convert it to a manual rack.
Last edited:

1G 1g AWD Sikky Staging Brake Install

Just wanted to make a post because of the lack of recent or updated info.

I just installed a...

How to properly paint your calipers. (5 steps)

This is a very simple and easy process. I have $40 worth of materials, but that is because I...

3000GT Brake Upgrade

This article outlines how to perform a front brake conversion using Mitsubishi 3000GT or Dodge...
Last edited:

2G How to adjust / setup coilovers / set ride height the correct way / With helper springs.

In this article I will go through the proper way to setup coilovers and ride height, but for...
Last edited:

1G Brake master and booster removal and brake fluid leak

If you’re losing brake fluid and you don’t see the leak, it’s most likely your master cylinder...

2G Wheel fitment guidance, 18x10.5" wheel, 295 tire, YES it has some clearance issues

Just thought i would note this down for people as i always believe in logging what i can for...
Last edited:

2G Fwd wheel bearing issue with ARP extended wheel studs, possibly AWD bearings

So not long ago i made the switch from wheel spacers and in doing so i got my extended studs...

2G Installing (Bobbys) front tubular upper arms.

Hey folks, first of all thanks everyone for the support, its my pleasure to keep bring items out...
Last edited:

1G Crossmember Bolt Sizes

I have spent days trying to source the sizes of the crossmember bolts on all three beams, not to...
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications Raven Fabrication RixRacing RockAuto RTM Racing STM Tuned VR Speed Factory

Build Thread Updates

Vendor Updates

Latest Classifieds