Auto axels, whats the trick to popping them out

[cyclonekid77]

I have a fwd with the f4a33 tranny. Whats the trick to popping the axels out of this thing? The passenger side on looks like a reall pain because its in alot farther. Any tips or suggestions would be great

 

[GDNF2ET]

http://www.dsmtuners.com/forums/dri...-axle-removal-transmission.html#post151939832

 

[cyclonekid77]

http://www.dsmtuners.com/forums/dri...-axle-removal-transmission.html#post151939832

I tried this method and all i got was a bunch of broken clamps. Your axels must have been pretty worn if that small screwdriver and the clamp got it out. These things are REALLY in there. I have tried a crowbar, flat end of a tire iron, big ass screwdriver, ect. and these things are goin nowhere. Any other ideas?

 

[cyclonekid77]

F These cups. There not goin anywhere. Im quite positive

 

[GDNF2ET]

That axle is brand new..Have popped it out no less then three times already ( don't ask ) All within seconds of prying on the clamp..Try tapping on it with a small hammer while you pry against the clamp.... You do have the hub loose from the strut and hanging down I hope..If the axle has no where to go its not gonna pop out...Good luck