Arkansas members

[cabot2g]

Yeah. I will let it go for 600 OBO.

I have a mightymax trans I you a looking for a rwd swap.

 

[zachakagoat]

I'm actually in the process of negotiating for a avenger gt kit car built on a be frame...

 

[cabot2g]

That's cool

 

[Chad1993]

Raced the 99gst today bobby . We both ran 10.40 on street tires without heating them up. I had boost leak and only pushing 12-15psi on t25. Having a hard time controlling wheel spin. I have a video I'll post later.

 

[DSMBanditFZ6]

Well gonna pick up my pistol tommorow. With the funds from the bike I bought me and the wife a pistol. She got a 1911-22. I on the other hand fell in love with a whole different animal. 650$. This is the exact weapon. Il have to pick it up tommorow due to my background check not coming back before they closed. My wife's came back no problem. Guess they have to dig through my spotless military record. It's a ruger.

Guess what caliber it is. It isn't a Deagle .50 what I would have liked. (Good luck finding one under 1k)

Lets just say, it's big it may not be 100% practical, but will finish anything.

 

[cabot2g]

Sold the 240, was on Craigslist for less than 3 hours.

Will pick up the DSM soon.

 

[cabot2g]

I will be back in a DSM soon.

Found my roller, just have to get a trailer and get it later this week.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

 

[DSMReviver]

WOW! Bobby that is a clean 2g. Just WOW! Nice find!

And bobby, im sorry to hear about your job man. I hope you find another quickly.

 

[cabot2g]

I have two months to work on a new job. Going to start updating my résumé and looking.
I believe god will lead me to where I need to be. To be honest I feel better today than I have in months. I've worried myself sick about the contract and not knowing. Now I know and what I need to do. In 36 years I've done a lot of things, everything from cabinet building to operations management to genetic research.

I was blessed to find a car I can use and sold my project within 3 hours of deciding to sale it. God is good and always have faith things will work out.

Now I have to save up some to put the engine back together.

 

[zachakagoat]

What you need to do is do a little trading, snag the wheels from greenbeans, sell those black ones that are on it (they look a little small, maybe the sidewall height is off?), use this opportunity to remove wiring and brackets that are not needed in the bay (since it is empty I am assuming), and have this puppy ready to run by the start of summer so we can all have a meet.

 

[DSMBanditFZ6]

I have two months to work on a new job. Going to start updating my résumé and looking.
I believe god will lead me to where I need to be. To be honest I feel better today than I have in months. I've worried myself sick about the contract and not knowing. Now I know and what I need to do. In 36 years I've done a lot of things, everything from cabinet building to operations management to genetic research.

I was blessed to find a car I can use and sold my project within 3 hours of deciding to sale it. God is good and always have faith things will work out.

Now I have to save up some to put the engine back together.

Glad your keeping positive bobby! I know things will turn around.

If I wasn't goin to school for paramedics, I'd say we open up our own custom cabinet shop then built and installed them for 2-1/2 yrs and if it wasn't for the straw bosses. I'd still be doing it.

What you need to do is do a little trading, snag the wheels from greenbeans, sell those black ones that are on it (they look a little small, maybe the sidewall height is off?), use this opportunity to remove wiring and brackets that are not needed in the bay (since it is empty I am assuming), and have this puppy ready to run by the start of summer so we can all have a meet.

Gonna start tearing mine apart to make a list of what I need. You decide to get rid of that t-28 for an upgrade let me know. I looked at the t-25 on this gst, It's got more blade movement than a quarter machine ball inside its round plastic holder.

 

[TalonSpeed]

Small problem, need help diagnosing.

I have noticed the transmission shifts fine when I first start driving. After 10-15 mins when everything is warmed up, the transmission will jerk\thump when coming to a stop. Only happens right when the car is about to come to a complete stop. Doesn't do it everytime but is becoming more frequent. Car was towed incorrectly (back wheels on ground), transmission shop checked the car out and said everything was fine, now a week later is is thumping and jerking what seems to be into 1st gear.

Any ideas?

 

[DSMBanditFZ6]

Wouldn't that damage the vicious coupler if equipped? If so I am fairly certain it's not hard to replace. You may not even have to drop the transmission entirely. not sure how it is on a 2g tranny. A 1g the VC is attached to the Xcase shaft in the tranny. Don't lose the itty bitty balls though.

Of course feel free to correct me if I'm wrong. It's been a while.

 

[cabot2g]

What you need to do is do a little trading, snag the wheels from greenbeans, sell those black ones that are on it (they look a little small, maybe the sidewall height is off?), use this opportunity to remove wiring and brackets that are not needed in the bay (since it is empty I am assuming), and have this puppy ready to run by the start of summer so we can all have a meet.

I don't think it has those wheels now. They are older pics. I think it has stock wheels. What wheels does greenbeans have?

And as far as cleaning up under the hood. That's the first thing to happen. All vacuum lines are coming out with the EGR.

I do have to find a turbo. Didn't get one when I got the engine.

I also have a solution for the wheel gap... I still have the springs off of Coltons GST.

 

[XiKeiyaZI]

I don't think it has those wheels now. They are older pics. I think it has stock wheels. What wheels does greenbeans have?

And as far as cleaning up under the hood. That's the first thing to happen. All vacuum lines are coming out with the EGR.

I do have to find a turbo. Didn't get one when I got the engine.

I've seen that car in person a few times. It's extremely clean what for needing a little work. I stole the cargo cover and shifter from it.

Glad to see you're getting back into the DSM world. Sucks that he sold his black one - I was actually going to buy it. Shot him a text the other day to learn the bad news.

 

[cabot2g]

I've seen that car in person a few times. It's extremely clean what for needing a little work. I stole the cargo cover and shifter from it.

Glad to see you're getting back into the DSM world. Sucks that he sold his black one - I was actually going to buy it. Shot him a text the other day to learn the bad news.

Yeah I was about to say I also need a shifter... Will a 1G shifter work?

Oh and the GSX should be in my garage by the end of the week as well. Colton bought it to get back into a DSM. He sold his WRX

 

[zachakagoat]

[Gonna start tearing mine apart to make a list of what I need. You decide to get rid of that t-28 for an upgrade let me know. I looked at the t-25 on this gst, It's got more blade movement than a quarter machine ball inside its round plastic holder.[/QUOTE]

I plan on upgrading towards the middle of the summer and will let you know. This t28 is in AMAZING condition and had little to no shaft play at all and no Knicked fines at all. I'm thinking I'm going to play it safe and go with a 16g variant for my power goals, proven and fairly straight forward.

 

[DSMBanditFZ6]

Talon speed, get all of the wheels off the ground and put it in gear, have a friend help you locate the noise exactly. Do these cars have U joints that joi on the drive shaft to the rear axle??

 

[XiKeiyaZI]

Yeah I was about to say I also need a shifter... Will a 1G shifter work?

Oh and the GSX should be in my garage by the end of the week as well. Colton bought it to get back into a DSM. He sold his WRX

Negative. They are different dimensions.

Short Throw Shifter w Knob Talon 95 98 Mitsubishi Eclipse 95 99 Eagle Megan | eBay

That's the one you want. Amazing design. It's a B&M design. Can pick them up in the classifieds for around $30-$50.

 

[cabot2g]

Negative. They are different dimensions.

Short Throw Shifter w Knob Talon 95 98 Mitsubishi Eclipse 95 99 Eagle Megan | eBay

That's the one you want. Amazing design. It's a B&M design. Can pick them up in the classifieds for around $30-$50.

So its just the shifter missing? The cabels still in the car?

 

[colbyc]

I'd be more than happy to do a wire tuck

 

[cabot2g]

I have a extra harness to work with.

 

[Marcopolo]

Hey anybody have an an extra MDP sensor for a 2g to sell? Lately, i been running it with the check engine light on it bugs me having it to drive it like that. I hit pick n pull a few times with no luck it seems there only n/t elipse on there lot.

 

[cabot2g]

I may have one, ill look around through my parts stash.

 

[greanbeans]

huh.